Brackets and mounts
Clevis Clamp Bracket
- Bounding box
- 98 × 80 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
art 1 of 5 — Clamp body Create a parametric 3D CAD model of the clevis clamp bracket shown in the reference drawing. Use millimeters. Start with a horizontal cylindrical clamp body with a Ø60 through bore (R30) and a Ø80 outer diameter (R40). Split the clamp on the right side as shown in the drawing. Part 2 of 5 — Mounting flanges and holes Continue the same model. Extend the upper and lower sides of the split into two stacked rectangular mounting flanges. Use the 58 mm overall dimension shown in the drawing, a 10 mm thickness for each flange, and a 5 mm clear gap. Add four Ø10 through holes, two per flange. Align the upper and lower holes in pairs. Use the 12 mm edge offsets and the 52 mm center-to-center dimension as indicated in the reference.
Parameters
| Name | Value | Range |
|---|---|---|
| Through bore diameter | 60 mm | 20 – 120 |
| Clamp body outer diameter | 80 mm | 40 – 160 |
| Body length along bore axis | 60 mm | 20 – 160 |
| Clear gap at the split | 5 mm | 1 – 20 |
| Flange thickness, each | 10 mm | 4 – 30 |
| Overall reach: bore axis to flange tip | 58 mm | 45 – 120 |
| Hole centre-to-centre | 52 mm | 16 – 120 |
| Hole offset from flange edges | 12 mm | 3 – 30 |
| Bolt hole diameter | 10 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl