Enclosures and housings
Classical Fluted & Arched Ceramic Molding (800 x 40 x 5 mm)
- Bounding box
- 800.0 × 40.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, editable 3D CAD master model of the classical decorative ceramic molding shown in the uploaded reference images. PROJECT DIMENSIONS: - Length: exactly 800 mm. - Front width: exactly 40 mm. - Maximum total thickness: exactly 5 mm, measured from the flat rear surface to the highest front decorative point. - Approximately 11 equally spaced repeating decorative motifs. DESIGN DETAILS: - Reproduce the classical fluted and arched decorative pattern from the reference images. - Include continuous rounded upper and lower rails. - Preserve the original proportions and decorative character. - Create smooth concave and convex transitions. - Keep the rear surface completely flat. - Make the pattern symmetrical and evenly distributed along the length. ENGINEERING REQUIREMENTS: - Generate actual CAD geometry, not just a rendered image. - Create a watertight solid body. - Keep all geometry within the specified 800 × 40 × 5 mm envelope. - Avoid sharp edges and self-intersections. - Use smooth transitions suitable for a ceramic mold master. - Make the geometry editable wherever possible. OUTPUT: - Interactive 3D preview. - Front, side, and isometric views. - STEP file (.step). - STL file (.stl). - All dimensions in millimeters. IMPORTANT: Prioritize fidelity to the uploaded reference images over inventing new decorative details. Do not exceed the 5 mm total thickness.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 800 mm | 200 – 2000 |
| Face Width (height of molding) | 40 mm | 20 – 120 |
| Max Total Thickness | 5 mm | 2 – 20 |
| Flat Backing Slab Thickness | 2 mm | 0.6 – 4 |
| Repeating Motif Count | 11 pcs | 3 – 40 |
| Arch Outer Radius | 19 mm | 8 – 23 |
| Arch Band Width | 4 mm | 1.5 – 7 |
| Arch Springing Line Y | 12 mm | 6 – 20 |
| Flutes per Motif | 3 pcs | 1 – 7 |
| Flute Bead Radius | 1.2 mm | 0.4 – 2 |
| Flute Pitch | 8 mm | 3 – 15 |
| Upper/Lower Rail Radius | 2.5 mm | 0.8 – 2.5 |
| Edge Softening Fillet | 0.4 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no