Enclosures and housings
Clamshell Enclosure Box 65x45x22 mm
- Bounding box
- 65.0 × 45.0 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular 2-part clamshell project enclosure box for a small electronics build. Dimensions: 65mm length, 45mm width, 22mm height with filleted rounded corners. The top piece should secure tightly to the bottom piece via small internal friction snap-joints. On the top face, place three circular cutouts in a linear row for tactile micro-switches, each hole measuring exactly 6mm in diameter. On one of the narrow side walls, create a precise rectangular slot cutout measuring 12mm x 5mm for a Type-C USB charging port. Right next to it on the same wall, place a slim rectangular slot measuring 15mm x 3mm to allow access to a Micro-SD card slot. The wall thickness of the entire box should be a uniform 2mm. Ensure the mesh topology is watertight, single-shelled, and fully optimized as an STL file for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (X) | 65 mm | 30 – 200 |
| Overall Width (Y) | 45 mm | 20 – 150 |
| Bottom Base Height | 12 mm | 5 – 100 |
| Top Lid Height | 10 mm | 5 – 100 |
| Uniform Wall Thickness | 2 mm | 0.8 – 5 |
| Rounded Corner Radius | 3 mm | 0 – 10 |
| Type-C USB Slot Width | 12 mm | 4 – 30 |
| Type-C USB Slot Height | 5 mm | 2 – 15 |
| Micro-SD Slot Width | 15 mm | 5 – 30 |
| Micro-SD Slot Height | 3 mm | 1 – 10 |
| Gap Between Ports | 2.5 mm | 0.5 – 10 |
| Port Centre Height | 6 mm | 2 – 20 |
| Micro-Switch Hole Dia | 6 mm | 2 – 12 |
| Switch Hole Count | 3 mm | 1 – 6 |
| Switch Hole Spacing | 12 mm | 5 – 30 |
| Snap Rib Width | 6 mm | 2 – 15 |
| Snap Rib Height | 2.8 mm | 1 – 8 |
| Snap Rib Protrusion | 0.6 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no