Brackets and mounts
Cigarette Lighter Socket Split-Sleeve Adapter
- Bounding box
- 28.9 × 29 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable parametric split-sleeve adapter (C-clip bushing) with a front flange for a car cigarette lighter socket, designed with the following specifications: 1. Main Body: A hollow cylinder with an Inner Diameter (ID) of [INSERT_ID_MM] mm and an Outer Diameter (OD) of [INSERT_OD_MM] mm. The overall length/depth of the sleeve should be [INSERT_LENGTH_MM] mm. 2. Front Flange (Lip): At one end of the cylinder, add a flat circular flange with an outer diameter of [INSERT_FLANGE_OD_MM] mm and a thickness of 2 mm to prevent the assembly from sliding inward through the dashboard hole. 3. The C-Clip Gap: Include a vertical slot (3 mm wide) running down the entire length of both the cylinder and the flange, creating an open "C" shape profile so the part can act as a flexible spring clamp. 4. Edge Finishing: Add a small 45-degree chamfer on the leading edge of the cylinder to make it easier to push into the dashboard hole.
Parameters
| Name | Value | Range |
|---|---|---|
| Sleeve inner diameter | 21.5 mm | 10 – 40 |
| Sleeve outer diameter | 24.5 mm | 12 – 45 |
| Sleeve length / depth | 20 mm | 5 – 60 |
| Front flange outer diameter | 29 mm | 15 – 60 |
| Front flange thickness | 2 mm | 1 – 6 |
| C-clip slot width | 3 mm | 1 – 10 |
| Lead-in chamfer on insertion edge | 1 mm | 0.4 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl