Enclosures and housings
Christmas Tree Ceramic Drape Mold
- Bounding box
- 200.0 × 250.0 × 25.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid 3D ceramic drape mold (hump mold) in the shape of a Christmas tree, matching the silhouette of the attached reference image as closely as possible. Design requirements: A solid, closed 3D object, NOT hollow. Christmas tree shape with smooth, rounded contours. Completely flat top surface. Sloped, tapered side walls that angle outward toward the bottom, making the base wider than the top. Smooth, rounded transitions between the top surface and the sloped sides. No sharp edges or corners. Overall dimensions: approximately 200 mm wide × 250 mm tall × 25 mm thick. Smooth bottom surface for stable placement. Important: This is a positive mold used to drape a flat slab of clay over it to create a ceramic Christmas tree-shaped plate or tray. It must NOT be a cookie cutter, a hollow mold, or a mold with a cavity. The geometry should closely follow the reference image, especially the gently sloping and rounded edges. The final model must be a watertight, manifold solid suitable for FDM 3D printing and exportable as an STL file.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 200 mm | 100 – 300 |
| Overall tree height | 250 mm | 100 – 350 |
| Overall mold thickness | 25 mm | 10 – 50 |
| Top surface scale | 0.88 mm | 0.7 – 0.98 |
| Edge roundover radius | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,