Brackets and mounts
Cheek Rest Pads - Version A & B (exploded)
- Bounding box
- 330 × 38 × 12.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create two separate, editable, parametric 3D models of low-profile cheek-rest pads for a replica stock. REFERENCE IMAGES Use the attached photographs as the primary visual reference. The stock shown at the bottom of the reference photo is the exact stock being used. Use the JMAC Skeleton Stock reference for general appearance only. Do not redesign or reproduce the entire stock. Create only the two cheek-rest pads. VERSION A — LOWER PAD Vertical height added above the stock: 7.1 mm (approximately 9/32 inch). Make the height adjustable between 6.35 mm and 7.94 mm. Keep the overall shape and footprint adjustable. VERSION B — TALLER PAD Vertical height added above the stock: 12.7 mm (1/2 inch). Use the same overall outline and footprint as Version A. SHAPE AND APPEARANCE Create a smooth, comfortable cheek-contact surface. Use gently rounded edges and corners. Make the top surface slightly contoured rather than having sharp edges. Keep both versions identical in length and width. Follow the proportions and appearance of the attached reference photos. Keep the underside simple and unobstructed. IMPORTANT EXCLUSIONS Do not include screw holes, threaded holes, screws, or other fastening hardware. Do not create a mounting or locking mechanism. Do not modify the original stock. Do not guess dimensions that cannot be determined from the reference images. 3D MODEL REQUIREMENTS Use millimeters throughout. Make both models separate, editable solid bodies. Make the models watertight. Avoid unnecessarily thin walls and fragile decorative features. Keep the geometry suitable for FDM 3D printing. Provide a separate STL export for each version. Also preserve editable CAD geometry. Before considering the models finished, identify any missing measurements needed to verify the dimensions and fit of the cheek pads.
Parameters
| Name | Value | Range |
|---|---|---|
| Length along the stock comb | 150 mm | 80 – 220 |
| Width across the stock comb | 38 mm | 22 – 70 |
| Plan-view corner radius | 8 mm | 2 – 18 |
| Height above stock at crown centre | 7.1 mm | 6.35 – 7.94 |
| Height above stock at crown centre | 12.7 mm | 6.35 – 20 |
| Crown fall from centre to side edge | 1.2 mm | 0.2 – 3 |
| Crown fall from centre to each end | 1.5 mm | 0.2 – 4 |
| Exploded spacing between the two pads | 30 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl