Mechanical parts
CG125 Mechanical Sound Prototype
- Bounding box
- 138.5 × 58 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
First printable prototype for a small 3-6V DC motor driven mechanical CG125 idle/rev sound maker using a single-lobe cam, replaceable spring-steel reed, and resonance chamber. Generic 20mm x 25mm motor envelope and 2mm shaft bore; dimensions adjustable.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 100 mm | 70 – 160 |
| Base width | 58 mm | 40 – 100 |
| Base thickness | 5 mm | 3 – 8 |
| Small DC motor body diameter | 20 mm | 15 – 30 |
| Motor body length | 25 mm | 15 – 40 |
| Motor shaft diameter | 2 mm | 1 – 4 |
| Cam diameter | 28 mm | 20 – 40 |
| Cam thickness | 5 mm | 3 – 8 |
| Cam lobes | 1 mm | 1 – 4 |
| Spring steel reed width | 8 mm | 5 – 14 |
| Spring steel reed thickness | 0.4 mm | 0.2 – 0.8 |
| Resonance chamber length | 48 mm | 30 – 80 |
| Resonance chamber width | 32 mm | 20 – 60 |
| Resonance chamber height | 22 mm | 12 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
