Brackets and mounts
CFA Coin Holder - 3-Part Modular Assembly
- Bounding box
- 55.0 × 100.0 × 13.2 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3-part 3D-printable modular coin holder assembly designed for West African CFA franc coins, optimized for 3D printing tolerances (0.4mm clearance). Dimensions: Overall height 100mm, width 55mm, total thickness 13.2mm. The assembly consists of 3 distinct printable parts: 1. Central Main Body / Elastic Skeleton: Features a vertical dual-column layout with 6 circular storage slots total (3 slots on the left column for 100 FCFA coins with a 26.6mm inner diameter, and 3 slots on the right column for 50 FCFA coins with a 22.5mm inner diameter). Each slot includes integrated flexible leaf-spring clips (1.4mm thickness) on the sides to securely grip multiple stacked coins. Clean flat surfaces with no embossed text or reliefs. 2. Front Cover Plate: Flat matching plate (1.5mm thickness) with alignment pins/clips to snap onto the front of the central body. 3. Back Cover Plate: Identical flat matching plate (1.5mm thickness) with snap-fit receptacles to seal the back. Ensure clean geometry, wall thicknesses of at least 1.6mm for structural strength, and smooth flat outer backs for reliable 3D printing without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 55 mm | 35 – 120 |
| Body Height | 100 mm | 50 – 200 |
| Body Thickness | 10.2 mm | 6 – 30 |
| Corner Radius | 5 mm | 0 – 12 |
| 100 FCFA Coin Diameter | 26.6 mm | 18 – 35 |
| 50 FCFA Coin Diameter | 22.5 mm | 14 – 32 |
| Slots per Column | 3 pcs | 2 – 3 |
| Vertical Slot Pitch | 33 mm | 26 – 40 |
| Leaf Spring Thickness | 1.4 mm | 0.6 – 2.5 |
| Leaf Spring Length | 1.6 mm | 1 – 4 |
| Leaf Spring Root Embed | 0.6 mm | 0.3 – 1.2 |
| Print Clearance | 0.4 mm | 0.1 – 1 |
| Cover Plate Thickness | 1.5 mm | 0.8 – 3 |
| Alignment Pin Diameter | 1.6 mm | 1 – 3 |
| Alignment Pin Length | 1.8 mm | 1 – 3 |
| Pin Hole Depth | 2 mm | 1 – 4 |
| Snap Post Length | 0.6 mm | 0.3 – 1.2 |
| Snap Receptacle Depth | 0.75 mm | 0.4 – 1.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
