Enclosures and housings
Cessna 172 Winglet (Tapered & Swept)
- Bounding box
- 412.8 × 67.5 × 204.5 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic 3D CAD model of a single upward-projecting winglet designed for the wingtip of a Cessna 172 Skyhawk aircraft. Requirements: 1. Design a tapered, swept, upward-pointing winglet with smooth aerodynamic contours. 2. Use a rounded leading edge and a clean trailing edge. 3. Give the winglet a realistic airfoil-shaped cross-section, with a thicker root and a thinner tip. 4. Design a flat, precisely defined attachment surface at the bottom so the winglet can be positioned against the existing Cessna 172 wingtip in SolidWorks. 5. Use a reasonable preliminary design with an approximate height of 200 mm, root chord of 400 mm, and tip chord of 200 mm. Treat these as initial design dimensions that can be modified later to match the aircraft. 6. Create the winglet as one solid, watertight CAD body. 7. Colour the entire winglet uniform matte grey. 8. Do not generate an aircraft, wing, stand, background, or any other object. Generate only the single winglet component. 9. Make the geometry suitable for engineering CAD work, not just a visual rendering. 10. Provide a downloadable STEP (.STEP/.STP) file compatible with SolidWorks. If available, also provide an editable native CAD file.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 200 mm | 100 – 400 |
| Root Chord | 400 mm | 150 – 700 |
| Tip Chord | 200 mm | 50 – 500 |
| Leading-Edge Sweep | 90 mm | 0 – 300 |
| Taper Curve Exponent | 0.8 - | 0.3 – 2 |
| Sweep Curve Exponent | 1.3 - | 0.5 – 3 |
| Root Thickness (t/c) | 15 % | 8 – 20 |
| Tip Thickness (t/c) | 9 % | 5 – 15 |
| Camber | 2 % | 0 – 6 |
| Camber Position | 0.4 - | 0.2 – 0.6 |
| Root Pad Height | 6 mm | 2 – 20 |
| Root Pad Footprint Scale | 1.03 - | 1.005 – 1.15 |
| Cant Angle | 0 deg | 0 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no