Enclosures and housings
Cervical Orthosis Collar - 5 Part Assembly
- Bounding box
- 339.9 × 157.0 × 209.1 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Paciente Mujer, 155 cm, 55 kg. Talla pequeña. Todas las medidas son de la piel; el interior de la ortesis debe dejar 6 mm de holgura para forro de neopreno médico (3 mm) + espuma. Medida cm Circunferencia de cuello / media de cuello 32 / 32 Base del cuello 34 Contorno de trapecio (acromion a acromion por la nuca) 39 Biacromial 32 Altura posterior / anterior del collarín 13 / 10 Mentón–escotadura yugular / mentón–esternón 9 / 9 Occipucio–C7 10 Mastoides–trapecio (por lado) 9 Ángulo mandibular–trapecio (por lado) 9 Ángulo mandibular–clavícula (por lado) 8 Entre apófisis mastoides / mastoides a mastoides por la nuca 12 / 12 Entre ángulos mandibulares 9 Escotadura yugular–C7 10 Mentón–nuca (nivel mandibular) 10 Mentón–mastoides (por lado) 11 Escotadura yugular–acromion (por lado) 13 Apertura frontal entre clavículas 3 Usa el cuello como elipse (semiejes 55 × 47 mm, perímetro ≈ 320 mm). Piezas Concha anterior/lateral (rígida): banda continua que rodea el cuello desde el esternón hasta el soporte de barbilla, con aleta esternal que desciende 30 mm sobre el esternón y apoyo en clavículas/trapecios (base de 34 cm). Columnas laterales que suben hasta ~60 mm sobre el nivel de la escotadura yugular. Cada columna lleva 5 agujeros de ajuste (paso 10 mm) para regular la altura de la barbilla. Ranuras para correa de velcro de 25 mm en los extremos posteriores. Concha posterior occipital: apoya de C7 a occipucio (13 cm de alto), ancho 12 cm entre mastoides, curvatura posterior mayor en la parte alta para la cabeza. Ranuras de ventilación y de correa. Soporte de barbilla ajustable: herradura con borde elevado (copa), que cubre del ángulo mandibular al mentón; dos postes que se deslizan por fuera de las columnas laterales con holgura de 0,5 mm. Cada poste tiene un agujero que se alinea con uno de los 5 agujeros de la columna. Recorrido de ajuste: 40 mm (±20 mm sobre la posición nominal, mentón a 90 mm de la escotadura yugular). Perillas ×2: disco Ø26 mm × 8 mm con borde moleteado y agujero Ø6,4 para tornillo M6 con tuerca. Forros: patrones planos de neopreno médico 3 mm con borde cosido para las caras que tocan la piel (no se imprimen). Requisitos de diseño Espesor de pared mínimo 4 mm (TPU 95A) en conchas; nada de aristas vivas, radio mínimo 2 mm en bordes que tocan piel. Holgura de impresión: 0,3–0,5 mm entre piezas móviles. Cuerpos sólidos cerrados, sin caras abiertas, sin autointersecciones, listos para imprimir sin soportes en las zonas críticas. Entrega: STEP por pieza + ensamblado, con operaciones de croquis y cotas nombradas para poder editar las medidas.
Parameters
| Name | Value | Range |
|---|---|---|
| Neck ellipse semi-axis X | 55 mm | 40 – 80 |
| Neck ellipse semi-axis Y | 47 mm | 35 – 70 |
| Liner / foam clearance | 6 mm | 2 – 15 |
| Shell wall thickness | 4 mm | 3 – 8 |
| Anterior wrap angle | 230 deg | 160 – 300 |
| Anterior band height | 75 mm | 40 – 120 |
| Base (clavicle) width | 340 mm | 200 – 400 |
| Base (trapezius) depth | 200 mm | 120 – 280 |
| Sternal fin / skirt drop | 30 mm | 10 – 60 |
| Lateral column position | 78 deg | 55 – 100 |
| Lateral column width | 18 deg | 8 – 40 |
| Column top height (from shell base) | 120 mm | 80 – 170 |
| Adjustment / screw hole dia | 6.4 mm | 4 – 10 |
| Holes per column | 5 pcs | 2 – 8 |
| Adjustment hole pitch | 10 mm | 6 – 20 |
| Lowest hole height | 70 mm | 40 – 120 |
| Velcro strap slot height | 26 mm | 15 – 40 |
| Strap slot width (through wall) | 6 mm | 3 – 12 |
| Posterior shell arc | 120 deg | 60 – 200 |
| Posterior shell height | 130 mm | 70 – 180 |
| Posterior shell bottom offset | 5 mm | 0 – 40 |
| Jugular notch height | 55 mm | 30 – 90 |
| Chin height above jugular notch | 90 mm | 60 – 120 |
| Mandibular cup inner radius | 45 mm | 30 – 65 |
| Chin cup horseshoe arc | 210 deg | 140 – 280 |
| Chin cup wall height | 30 mm | 12 – 50 |
| Chin cup floor thickness | 4 mm | 2 – 8 |
| Sliding post width | 30 mm | 15 – 45 |
| Sliding post thickness | 4 mm | 2 – 8 |
| Post-to-column clearance | 0.5 mm | 0.3 – 1 |
| Knob diameter | 26 mm | 16 – 40 |
| Knob thickness | 8 mm | 4 – 16 |
| Knob screw hole dia | 6.4 mm | 3 – 10 |
| Knurl flutes | 12 pcs | 6 – 30 |
| Knurl flute dia | 2.4 mm | 1 – 5 |
| Knob-to-post clearance | 0.5 mm | 0.3 – 1 |
| Skin-contact edge radius | 2 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
