Cat Food Pouch Dispenser (Body + Removable Lid, Exploded)

Create a functional 3D-printable cat food pouch dispenser in millimeters. Generate exactly TWO separate rectangular parts side by side, at least 10 mm apart: a hollow dispenser body and its matching removable lid. Both parts must be independently editable. Do not fuse them. BODY: Outer size 150 × 110 × 235 mm. Wall thickness 3 mm, bottom thickness 3 mm. Open top, completely empty interior, no shelves, dividers, stairs, or internal geometry. Store 20 flat pouches, each 130 × 90 × 10 mm, stacked horizontally one above another, broad front faces facing forward. Add a front bottom dispensing through-opening 134 × 18 mm, bottom edge 8 mm above the base. Add a separate front vertical viewing through-window 12 × 140 mm, positioned on the right, lower edge 55 mm above the base. Keep both openings separate. Add raised vertical ribs on the OUTSIDE left and right walls only: 5 mm wide, 2 mm raised, approximately 5 mm spacing. Keep the inside smooth. LID: Separate rectangular lid, NOT round. Plate size 154 × 114 × 8 mm, centered over the body with 2 mm overhang on every side. Add a hollow rectangular locating rim underneath, 2 mm high, 2 mm wall thickness, outer dimensions 143.2 × 103.2 mm. Body opening is 144 × 104 mm, giving 0.4 mm clearance on every side. The lid must fit this exact body opening and be removable by hand. Place it beside the body, not on top. Both parts must be real watertight 3D geometry suitable for FDM printing. All openings must be actual holes. Preserve the hollow cavity. No extra objects, pouches, text, or logos. Export as STL in millimeters, preferably as two separate files.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.