Brackets and mounts
Cat-5 Cable Holder Bracket
- Bounding box
- 12 × 160 × 12.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
A mechanical cable holder bracket consisting of a flat rectangular mounting base measuring 12 mm wide, 160 mm long, and 4 mm thick. Along the length of the mounting base, include a series of 14 identical circular cable clips spaced evenly. Each clip has an outer dimension of 10 mm by 10 mm with a 5 mm thickness, featuring an inner cutout/opening of 4.5 mm width to securely snap in Cat-5 cables.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 160 mm | 40 – 400 |
| Base width | 12 mm | 6 – 40 |
| Base thickness | 4 mm | 2 – 10 |
| Base corner radius | 2 mm | 0.5 – 5 |
| Number of clips | 14 mm | 1 – 40 |
| Clip outer diameter | 10 mm | 6 – 30 |
| Clip width along cable | 5 mm | 1 – 20 |
| Cable bore diameter | 4.5 mm | 2 – 15 |
| Snap opening width | 4 mm | 1 – 15 |
| Clip overlap into base | 1 mm | 0.3 – 2 |
| End clip centre offset | 15 mm | 3 – 80 |
| Screw clearance hole diameter | 3.4 mm | 1 – 8 |
| Hole centre from base end | 7 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
