3D preview of Carry Case Sliding Top Cover
Loading the interactive model…
Interactive 3D model of Carry Case Sliding Top Cover

Enclosures and housings

Carry Case Sliding Top Cover

1 views
Bounding box
182.4 × 75.4 × 9.5 mm
Engine
3D Printing B-rep
Parameters
12
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Units: mm. New separate part: the sliding top cover for that carry case, printed upside down (top face on the bed), no supports. Variables: same as the case frame (W, D2, top), plus cover_t = 4 and fit = 0.3. - Plate: X -3.9 to W + 3.9, Y -D2 to D2, Z top to top + cover_t. Its underside rests on the side walls and the spine, 1 mm above the cartridges, so they cannot lift out while it is closed. - At each X end, a lip along the full depth that wraps the side wall's 45-degree head with fit clearance: on the left it is solid from X -3.9 to -2.3 down to Z = top - 5.5, plus a 45-degree hook under the head reaching in to X = -0.3. Mirror it at the right end (X = W). - Two dimples (radius 1.25, centered 0.65 mm below the underside) at Y = -D2 + 4, X = -1 and X = W + 1, so the cover clicks onto the frame's snap bumps. The cover slides on from the front (+Y) toward the back until it meets the stops. Expected size: 182.4 x 75.4 x 9.5 mm.

Parameters

NameValueRange
Inner width between side walls174.6 mm40 – 300
Half depth of the case37.7 mm10 – 150
Height of side wall tops on the frame62 mm10 – 200
Cover plate thickness4 mm2 – 8
Sliding clearance per side0.3 mm0.1 – 0.6
Side wall head overhang the hook wraps2 mm1 – 4
Lip wall thickness1.6 mm1.2 – 4
Lip drop below plate underside5.5 mm3 – 12
Dimple radius1.25 mm0.8 – 2
Dimple centre below underside0.65 mm0.3 – 1.2
Dimple distance from back edge4 mm2 – 20
Dimple offset outward from wall face1 mm0.5 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Carry Case Sliding Top Cover - Free CAD Model (STEP, STL) | TextoCAD