Enclosures and housings
Carbon Tube LiDAR Mount Assembly
- Bounding box
- 355.5 × 183.5 × 674.0 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
i need livox mid-360S case to hang it upside down and to be connected with carbon tubes to a rover. It should have vibration isolation and heat transfer the carbon tubes are vertical and their inside diameter is 25 mm and are 64 cm long. lidar needs to be 45 cm high and 10.6 cm in the direction of the rover outside dimeter is 27, center to center spacing is 310.5mm , 45 cm is measured from the horizontal top tube, and 106 mm is measured from th etube centerline to lidars center do it all from carbon tubes to minimize weight
Parameters
| Name | Value | Range |
|---|---|---|
| Tube OD | 27 mm | 20 – 40 |
| Tube ID | 25 mm | 20 – 38 |
| Vertical Tube Length | 640 mm | 500 – 800 |
| Center-to-Center Spacing | 310.5 mm | 250 – 400 |
| Top Tube Length | 337.5 mm | 300 – 400 |
| Top Tube Height | 640 mm | 500 – 700 |
| Clamp Length (X) | 45 mm | 30 – 60 |
| Clamp Width (Y) | 35 mm | 25 – 50 |
| Clamp Height (Z) | 30 mm | 20 – 40 |
| Collar Length (X) | 38 mm | 25 – 50 |
| Collar Width (Y) | 30 mm | 20 – 45 |
| Collar Height (Z) | 25 mm | 15 – 35 |
| Lower Collar Z | 180 mm | 150 – 220 |
| Upper Collar Z | 200 mm | 150 – 220 |
| Isolator Diameter | 20 mm | 10 – 30 |
| Isolator Length | 20 mm | 10 – 30 |
| Stud Diameter | 4 mm | 3 – 6 |
| Stud Length | 10 mm | 5 – 20 |
| Isolator Y Offset | 30 mm | 10 – 80 |
| Cradle Outer Size | 120 mm | 80 – 160 |
| Cradle Height | 85 mm | 50 – 120 |
| Cradle Wall Thickness | 5 mm | 2 – 10 |
| Cradle Aperture Size | 40 mm | 20 – 80 |
| Cradle Mount Hole Dia | 4.5 mm | 3 – 6 |
| Cradle Mount Hole Spacing | 50 mm | 30 – 80 |
| Cradle X Position | 0 mm | -50 – 50 |
| Cradle Y Position | 106 mm | 50 – 150 |
| Cradle Z Position | 190 mm | 150 – 250 |
| Spreader Plate Size | 100 mm | 60 – 140 |
| Spreader Thickness | 3 mm | 1 – 8 |
| Spreader Hole Dia | 4.5 mm | 3 – 6 |
| Spreader Hole Offset | 25 mm | 10 – 45 |
| Spreader Z Position | 145 mm | 120 – 170 |
| Thermal Pad Size | 90 mm | 50 – 120 |
| Thermal Pad Thickness | 2 mm | 1 – 5 |
| Thermal Pad Z Position | 147.5 mm | 130 – 160 |
| Screw Diameter | 4 mm | 3 – 5 |
| Screw Length | 16 mm | 8 – 30 |
| Screw Head Diameter | 8 mm | 5 – 12 |
| Screw Head Height | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no