Fittings and adapters
Cam Lock Mechanism
- Bounding box
- 33.5 × 22.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric model of a cam lock mechanism. The main body is a cylinder with a 15 mm diameter and 9 mm height, flattened on two opposite sides to a width of 14 mm across flats. At the front end of this cylinder, add a round flange head with a 22 mm diameter and 4 mm thickness. Cut a straight screwdriver slot across the center of the flange face that is 2 mm wide and 1.5 mm deep. At a total assembly height of 13 mm from the front surface of the flange head, add a flat rectangular latch lever that is 30 mm long, 12 mm wide, and 2 mm thick. Position the lever so that its left edge is aligned perfectly flush with the leftmost outer edge of the 15 mm main cylinder, extending out to the right side.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Diameter | 15 mm | 8 – 30 |
| Body Height | 9 mm | 4 – 30 |
| Across Flats | 14 mm | 6 – 29 |
| Flange Head Diameter | 22 mm | 12 – 40 |
| Flange Head Thickness | 4 mm | 1 – 10 |
| Screwdriver Slot Width | 2 mm | 0.5 – 6 |
| Screwdriver Slot Depth | 1.5 mm | 0.2 – 3.5 |
| Latch Lever Length | 30 mm | 10 – 80 |
| Latch Lever Width | 12 mm | 4 – 30 |
| Latch Lever Thickness | 2 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con