Enclosures and housings
California Scratchers Cover Decorations
- Bounding box
- 127.9 × 70.1 × 2.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
**CORRECTION REQUEST — SCRATCHERS BOOK DECORATIONS** The previous result does not match my reference image. Please correct the existing seven components rather than generating an entirely new design. **IMPORTANT: These are separate 3D decorations to glue onto an existing WHITE book. DO NOT create or modify the book.** The book cover measures approximately 153 mm wide × 102 mm high. ### 1. Fix SCRATCHERS lettering - Keep the exact spelling: SCRATCHERS. - Use bold, clean, readable block lettering. - Arrange the letters in a gentle upward arch, like Concept A in the attached reference. - The letters must NOT overlap or intersect each other. - Make the complete word approximately 115–125 mm wide. - Give the letters flat backs and approximately 1.6 mm thickness. - Connect the letters discreetly if needed for easier gluing, without a visible rectangular backing plate. ### 2. Fix the lottery sunburst - Create a yellow sunburst approximately 42–45 mm wide. - Use broad, sturdy points rather than thin spikes. - Position the sunburst directly below the SCRATCHERS lettering. - Give it a flat back. ### 3. Fix the blue L - Move the existing blue capital L to the CENTER of the yellow sunburst. - Make the L approximately 25–27 mm tall. - The L must sit on top of the sunburst, not beside it. - Keep the L a separate printable component for blue filament. ### 4. Fix the decorative stripes - Arrange two blue horizontal bars to the LEFT of the sunburst. - Arrange two matching blue horizontal bars to the RIGHT. - Keep the bars symmetrical, with rounded ends. - Do not place all four bars in one long row. ### 5. Correct the overall layout Arrange the decorations as they would appear on the front cover: TOP: Arched SCRATCHERS lettering. CENTER: Yellow sunburst with blue L. LEFT AND RIGHT: Two decorative blue bars on each side of the sunburst. Keep all decorations within a 135 × 86 mm area, leaving room around the book edges and hinge. ### 6. Printing requirements - Bambu Lab P2S, 0.4 mm nozzle. - PLA filament. - Blue and yellow parts printed separately. - Flat backs for gluing. - No floating geometry or fragile thin features. - No supports required when printed flat. - Export individual STL components. **IMPORTANT:** Show the pieces arranged in their correct cover positions in Assembly View. For Print Layout, they may be separated for printing, but they must not overlap. Preserve the existing seven components wherever possible. Do not create additional decorative elements. Check spelling, dimensions, and alignment before completing the correction.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall lettering width | 125 mm | 80 – 140 |
| Letter cap height | 15 mm | 8 – 24 |
| Lettering thickness | 1.6 mm | 0.8 – 4 |
| Arch radius of the lettering | 350 mm | 150 – 900 |
| Sunburst diameter | 44 mm | 20 – 90 |
| Solid centre disc diameter | 32 mm | 10 – 60 |
| Sunburst thickness | 1.6 mm | 0.8 – 4 |
| Number of sunburst points | 12 mm | 6 – 24 |
| Letter L height | 26 mm | 10 – 44 |
| Letter L width | 16 mm | 8 – 30 |
| Letter L stroke width | 5 mm | 2 – 12 |
| Letter L thickness | 1.2 mm | 0.8 – 4 |
| Stripe length | 30 mm | 10 – 60 |
| Stripe height | 2 mm | 1.2 – 8 |
| Stripe thickness | 1.2 mm | 0.8 – 4 |
| Gap between sunburst and stripes | 6 mm | 0 – 40 |
| Sunburst centre height | -6 mm | -20 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,