Enclosures and housings
California Scratchers Cover Decorations
- Bounding box
- 385.1 × 48 × 1.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
**PROJECT: California Scratchers Book — 3D Cover Decorations Only** Create real, printable 3D decorative components based on the attached reference image. **IMPORTANT: DO NOT CREATE A BOOK.** I already have a 3D-printed book. Your job is to create ONLY the raised decorative pieces that will be glued onto its front cover. ### Cover dimensions - Existing book: approximately 153 mm wide × 102 mm tall. - Landscape orientation. - Leave at least 8 mm clearance around the outer edges and left hinge. - All decorations must fit within a maximum design area of 135 × 86 mm. - Do not resize or modify the existing book. ### Components to create **1. SCRATCHERS lettering** - Spell exactly: SCRATCHERS. - Bold, raised, slightly arched lettering matching Concept A in the reference. - Maximum overall width: 125 mm. - Approximate height: 22 mm. - Thickness: 1.6 mm. - Flat backs for gluing. - Color: Blue. - Connect or group letters for easier positioning without adding a visible rectangular backing plate. **2. Lottery-style sunburst** - Decorative yellow sunburst with rounded, printable points. - Approximately 48 mm in diameter. - Thickness: 1.6 mm. - Flat back. - Separate component. **3. Raised letter L** - Bold capital L centered over the sunburst. - Approximately 27 mm tall. - Thickness: 1.2 mm. - Color: Blue. - Separate component with a flat back. - Ensure it fits completely within the sunburst. **4. Decorative stripes** - Four horizontal blue bars. - Two bars on each side of the sunburst. - Rounded ends. - Approximately 2 mm tall and 1.2 mm thick. - Separate printable components. - Keep the arrangement symmetrical. ### Printing requirements - Printer: Bambu Lab P2S. - Nozzle: 0.4 mm. - Material: PLA. - Colors: Blue and Yellow. - All pieces must be real 3D solids. - All pieces must have flat bottoms. - No floating geometry. - No fragile, paper-thin features. - No supports should be necessary when printed flat. - No images, decals, textures, or photo surfaces. - No complete book, hinges, or enclosure. - No rectangular nameplate behind the lettering. ### Output Provide individual STL files for each component, plus an assembled layout preview showing how they fit on a 153 × 102 mm cover. The layout preview must not become part of the printable geometry. Check that the components do not overlap and can be glued onto the cover individually. **Do not change the approved visual style of Concept A.**
Parameters
| Name | Value | Range |
|---|---|---|
| Overall lettering width | 125 mm | 80 – 140 |
| Letter cap height | 15.5 mm | 8 – 24 |
| Lettering thickness | 1.6 mm | 0.8 – 4 |
| Arch radius of the lettering | 350 mm | 150 – 900 |
| Sunburst diameter | 48 mm | 20 – 90 |
| Solid centre disc diameter | 30 mm | 10 – 60 |
| Sunburst thickness | 1.6 mm | 0.8 – 4 |
| Number of sunburst points | 12 mm | 6 – 24 |
| Letter L height | 27 mm | 10 – 44 |
| Letter L width | 16 mm | 8 – 30 |
| Letter L stroke width | 5 mm | 2 – 12 |
| Letter L thickness | 1.2 mm | 0.8 – 4 |
| Stripe length | 30 mm | 10 – 60 |
| Stripe height | 2 mm | 1.2 – 8 |
| Stripe thickness | 1.2 mm | 0.8 – 4 |
| Gap between the separate parts | 12 mm | 0 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,