Enclosures and housings
cabinet_shell
- Bounding box
- 400.0 × 500.0 × 196.5 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create one CAD solid named cabinet_shell. Units: mm. Global coordinates: origin at the front-bottom-left outer corner of the closed cabinet, +X right, +Y up, +Z toward the rear. Model the part in place; do not recenter. Light-gray open-front rectangular sheet-metal enclosure body, uniform 1.5 mm walls (left, right, top, bottom, rear), no door. Sharp 90 degree outer corners, no fillets. Outer extents X 0-400, Y 0-500, Z 3.5-200 (the door and a 2 mm gasket occupy Z 0-3.5). Interior clear: X 1.5-398.5, Y 1.5-498.5, Z 3.5-198.5. Cutouts through the walls: - Top panel: four Ø5.5 holes at (X,Z) = (135,88), (135,112), (265,88), (265,112). - Left wall (X 0-1.5): louver opening 80 x 22 mm at Y 336-358, Z 50-130, filled with 5 horizontal louver slots (3 mm high, 4.4 mm pitch), blades sloped 35 degrees downward toward the outside; plus one Ø12 round hole centered at Y 372, Z 130. - Right wall (X 398.5-400): the same louver at Y 336-358, Z 50-130, no round hole. No other holes. No door, hinges, or fasteners.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Thickness | 1.5 mm | 0.5 – 4 |
| Outer Width (X) | 400 mm | 100 – 800 |
| Outer Height (Y) | 500 mm | 100 – 800 |
| Outer Front Face Z | 3.5 mm | 0 – 10 |
| Outer Rear Face Z | 200 mm | 50 – 500 |
| Top Hole Diameter | 5.5 mm | 2 – 20 |
| Top Hole 1 X | 135 mm | 0 – 400 |
| Top Hole 1 Z | 88 mm | 0 – 200 |
| Top Hole 2 X | 135 mm | 0 – 400 |
| Top Hole 2 Z | 112 mm | 0 – 200 |
| Top Hole 3 X | 265 mm | 0 – 400 |
| Top Hole 3 Z | 88 mm | 0 – 200 |
| Top Hole 4 X | 265 mm | 0 – 400 |
| Top Hole 4 Z | 112 mm | 0 – 200 |
| Left Round Hole Diameter | 12 mm | 2 – 40 |
| Left Round Hole Y | 372 mm | 0 – 500 |
| Left Round Hole Z | 130 mm | 0 – 200 |
| Louver Opening Y Min | 336 mm | 0 – 500 |
| Louver Opening Y Max | 358 mm | 0 – 500 |
| Louver Opening Z Min | 50 mm | 0 – 200 |
| Louver Opening Z Max | 130 mm | 0 – 200 |
| Louver Slot Height | 3 mm | 1 – 10 |
| Louver Slot Pitch | 4.4 mm | 2 – 10 |
| Louver Slot Angle | 35 deg | 0 – 60 |
| Louver Slot Count | 5 | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no