Enclosures and housings
C-Channel Beam with Flanges
- Bounding box
- 480.0 × 80.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Take the existing solid 3D model and perform a Boolean Cut operation. Drop a secondary subtractive solid block measuring 460mm length, 24mm width, and 9mm height. Center this block dynamically inside the main longitudinal bar so it extends fully past both end plates, hollowing out the beam into an open structural C-channel with a 3mm wall thickness. Apply a matte black appearance material to all surfaces of the final geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Beam Length | 460 mm | 100 – 1000 |
| Beam Width | 80 mm | 30 – 200 |
| Beam Height | 60 mm | 30 – 200 |
| Wall Thickness | 3 mm | 1 – 10 |
| Flange Thickness | 10 mm | 5 – 30 |
| Flange Width | 80 mm | 30 – 200 |
| Flange Height | 60 mm | 30 – 200 |
| Hole Diameter | 10 mm | 5 – 30 |
| Hole Count | 5 | 1 – 20 |
| Hole End Offset | 20 mm | 5 – 100 |
| Cut Block Length | 460 mm | 50 – 1000 |
| Cut Block Width | 24 mm | 5 – 100 |
| Cut Block Height | 9 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox