Jigs and fixtures
Building Enclosure with Door and Window
- Bounding box
- 3830.0 × 2780.0 × 3810.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
General Structural Dimensions Overall Wall Height: 3.66 m across all four elevations. Base / Plinth Thickness: 0.15 m shown along the bottom of each view. Detailed Elevation Breakdown 1. Right Elevation Width: 3.8 m (noted as 3.83 m in standard CAD interpretations) Height: 3.66 m Base: 0.15 m Features: A plain wall with no openings. 2. Left Elevation Width: 3.83 m Height: 3.66 m Base: 0.15 m Features: A plain wall with no openings. 3. Front Elevation Width: 2.78 m Height: 3.66 m Base: 0.15 m Features: Includes a rectangular doorway/entrance opening: Door Width: 1.0 m Door Height: 2.01 m 4. Back Elevation Width: 2.78 m Height: 3.66 m Base: 0.15 m Features: Includes a centered window opening: Window Width: 1.76 m Window Height: 1.46 m
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 3660 mm | 1000 – 10000 |
| Base / Plinth Thickness | 150 mm | 10 – 1000 |
| Right Elevation Width | 3830 mm | 1000 – 10000 |
| Left Elevation Width | 3830 mm | 1000 – 10000 |
| Front Elevation Width | 2780 mm | 1000 – 10000 |
| Back Elevation Width | 2780 mm | 1000 – 10000 |
| Door Width | 1000 mm | 100 – 5000 |
| Door Height | 2010 mm | 100 – 5000 |
| Window Width | 1760 mm | 100 – 5000 |
| Window Height | 1460 mm | 100 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl