Enclosures and housings
Bucket Lid Duct Adapter (2-Part Screw Fit)
- Bounding box
- 150.0 × 150.0 × 285.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
I want to create an adapter for an exhaust hood's exhaust air, the duct is 10.5 cm wide, i'd like it to sink into the adapter for around 10 cm the base should be 15cm wide though, because it will be installed on a bucket lid, meaning i will need a counter screw part on the bottom, also 15 cm wide the bottom part need to have 10 cm cicumbrance inside for the airflow, it needs to be 15 cm deep into the bucket, from the lid so in total it should be 2 parts, 1 top part with a 15cm base and a 10cm hole with a 10cm high duct around the hole, a screwing mechanism for the bottom part the second part should also have a 15cm base, 10 hole but with a thin 15 cm high part around the 10 cm hole which goes into the bucket
Parameters
| Name | Value | Range |
|---|---|---|
| Duct Bore (both parts) | 105 mm | 60 – 140 |
| Top Base Flange Dia | 150 mm | 100 – 250 |
| Top Flange Thickness | 15 mm | 5 – 40 |
| Duct Collar OD | 115 mm | 108 – 170 |
| Duct Collar Height | 100 mm | 20 – 250 |
| Bottom Base Flange Dia | 150 mm | 100 – 250 |
| Bottom Flange Thickness | 20 mm | 10 – 50 |
| Intake Tube OD | 115 mm | 105 – 180 |
| Intake Tube Bore (airflow) | 100 mm | 60 – 170 |
| Intake Tube Depth Below Lid | 150 mm | 40 – 300 |
| Counter-Screw Recess Depth | 16 mm | 6 – 40 |
| Male Spigot OD | 127 mm | 100 – 180 |
| Thread Crest Dia (male) | 133 mm | 104 – 190 |
| Thread Ribs per Part | 3 pcs | 2 – 8 |
| Thread Rib Thickness | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no