Brackets and mounts
Brother DCP-T220 Paper Output Support Flap
- Bounding box
- 98 × 110 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable replacement paper output support flap for a Brother DCP-T220 printer. The measured clear distance between the inner faces of the two hinge mounts is 94.25 mm. Design the main hinge assembly to fit within a 94.0 mm clearance, leaving 0.25 mm total clearance. Use a 110 mm long, 2.5 mm thick support plate, with an 8 mm raised paper stop at its free end and R3 rounded corners. Add two outward-facing hinge pins, initially 1.8 mm in diameter and 2 mm long. The hinge geometry must be adjustable, as the original pin hole diameter has not been verified. Ensure the 94 mm dimension refers to the outer faces of the hinge support tabs, excluding the outward-projecting pins. Make the model suitable for PETG FDM printing and export as STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Measured inner-face gap between hinge mounts | 94.25 mm | 80 – 120 |
| Total side clearance to mounts | 0.25 mm | 0.05 – 1 |
| Hinge pin diameter | 1.8 mm | 1 – 4 |
| Hinge pin protrusion length | 2 mm | 0.5 – 6 |
| Hinge tab wall thickness | 3 mm | 1.2 – 6 |
| Hinge pin axis distance from back edge | 8 mm | 3 – 20 |
| Hinge pin axis height above bed | 9 mm | 3 – 25 |
| Support plate length | 110 mm | 40 – 200 |
| Plate thickness | 2.5 mm | 1.2 – 6 |
| Free-end corner radius | 3 mm | 0.5 – 10 |
| Paper stop height above bed | 8 mm | 2 – 20 |
| Paper stop wall thickness | 2.5 mm | 1.2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
