Brackets and mounts
Bracket Plate with Hub and Twin Bosses
- Bounding box
- 102.5 × 109.4 × 23.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D mechanical bracket plate model with the following exact parameters: A main upper circular hub with outer diameter 74.58 mm (D6) and height 22.00 mm (E2), featuring a central through-hole of diameter 25.00 mm (D4). On this hub, create a bolt circle pattern of diameter 47.50 mm (D5) containing 9 (N) small through-holes each with diameter 9.01 mm (D3). The base plate features two lower circular mounting bosses with diameters D1 = 22.73 mm and D2 = 45.45 mm, positioned at an angle A1 = 30 degrees. Connect the main hub and lower bosses using reinforcing ribs of width L1 = 6.00 mm, blended with fillet radii R1 = 7.00 mm. The outer contour of the body is bounded by side arcs with radius R4 = 102.00 mm, a central spine radius R2 = 112.20 mm, and a bottom central cutout arc with radius R3 = 33.93 mm. The overall stepped thicknesses and heights are defined by E1 = 14.00 mm, E4 = 23.00 mm, E5 = 18.00 mm, with internal step features of E6 = 6.00 mm and E7 = 6.00 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Outer Diameter D6 | 74.58 mm | 40 – 150 |
| Hub Height E2 | 22 mm | 5 – 60 |
| Central Bore D4 | 25 mm | 5 – 50 |
| Bolt Circle Diameter D5 | 47.5 mm | 20 – 100 |
| Bolt Hole Count N | 9 pcs | 3 – 24 |
| Bolt Hole Diameter D3 | 9.01 mm | 2 – 20 |
| Boss Hole Diameter D1 | 22.73 mm | 5 – 50 |
| Boss Outer Diameter D2 | 45.45 mm | 15 – 100 |
| Boss Angle A1 | 30 deg | 5 – 80 |
| Rib Width L1 | 6 mm | 1 – 20 |
| Side Arc Radius R4 | 102 mm | 40 – 300 |
| Spine Arc Radius R2 | 112.2 mm | 40 – 300 |
| Bottom Cutout Radius R3 | 33.93 mm | 15 – 80 |
| Base Thickness E1 | 14 mm | 3 – 40 |
| Boss Height E4 | 23 mm | 5 – 50 |
| Rib Height E5 | 18 mm | 3 – 40 |
| Bore Counterbore Step E6 | 6 mm | 0 – 20 |
| Boss Counterbore Step E7 | 6 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
