3D preview of Bracket Plate with Central Hub and Twin Mounting Bosses
Loading the interactive model…
Interactive 3D model of Bracket Plate with Central Hub and Twin Mounting Bosses

Brackets and mounts

Bracket Plate with Central Hub and Twin Mounting Bosses

1 views
Bounding box
126.5 × 130.0 × 23.0 mm
Engine
Precision B-rep
Parameters
20
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Please generate the precise 3D parametric CAD model for the mechanical bracket plate based on the provided engineering drawing, using these exact parameters for Row 6: - **Central Hub (Upper Cylinder):** Outer diameter D6 = 74.58 mm, Through-hole diameter D4 = 25.00 mm, Height E2 = 22.00 mm. - **Bolt Circle Pattern:** Pitch circle diameter D5 = 47.50 mm, containing N = 9 evenly spaced through-holes each with diameter D3 = 9.01 mm. - **Lower Mounting Bosses (Ojal/Bases):** Left boss diameter D1 = 22.73 mm, Right boss diameter D2 = 45.45 mm, positioned symmetrically at an angle A1 = 30.00 degrees from the vertical centerline. - **Reinforcing Ribs:** Width L1 = 6.00 mm, blended into the bosses and hub with fillet radius R1 = 7.00 mm. - **Body Contours & Radii:** Outer side arcs radius R4 = 102.00 mm, main body spine radius R2 = 112.20 mm, and bottom central cutout arc radius R3 = 33.93 mm. - **Thicknesses & Heights (Z-axis dimensions):** Main base plate thickness E1 = 14.00 mm, right block height E4 = 23.00 mm, left block height E5 = 18.00 mm, lower positioning reference E3 = 21.00 mm, and internal step offsets E6 = 6.00 mm / E7 = 6.00 mm. Construct the geometry step by step: build the main plate with the lower bosses and cutout, extrude the central hub with its 9-hole circular pattern, add the structural ribs, and apply the correct step thicknesses.

Parameters

NameValueRange
Hub Outer Diameter D674.58 mm20 – 160
Hub Through-Hole Diameter D425 mm5 – 60
Hub Height E222 mm5 – 60
Bolt Circle Pitch Diameter D547.5 mm10 – 120
Bolt Hole Count N9 count3 – 24
Bolt Hole Diameter D39.01 mm2 – 20
Left Boss Diameter D122.73 mm5 – 80
Right Boss Diameter D245.45 mm5 – 100
Boss Angular Offset A130 deg5 – 80
Rib Width L16 mm1 – 20
Rib Blend Radius R17 mm0.5 – 20
Outer Side Arc Radius R4102 mm20 – 300
Main Body Spine Radius R2112.2 mm20 – 300
Bottom Cutout Arc Radius R333.93 mm5 – 100
Base Plate Thickness E114 mm2 – 60
Right Boss Height E423 mm2 – 80
Left Boss Height E518 mm2 – 80
Lower Reference Height E321 mm2 – 80
Top Step Offset E66 mm0.5 – 30
Bottom Step Offset E76 mm0.5 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Bracket Plate with Central Hub and Twin Mounting Bosses - Free CAD Model (STEP, STL) | TextoCAD