3D preview of Bracket Plate with Central Hub and Lower Bosses
Loading the interactive model…
Interactive 3D model of Bracket Plate with Central Hub and Lower Bosses

Brackets and mounts

Bracket Plate with Central Hub and Lower Bosses

1 views
Bounding box
189.9 × 219.3 × 23.0 mm
Engine
Precision B-rep
Parameters
21
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Please generate the precise 3D parametric CAD model for the mechanical bracket plate based on the provided engineering drawing, using these exact parameters for Row 6: - **Central Hub (Upper Cylinder):** Outer diameter D6 = 74.58 mm, Through-hole diameter D4 = 25.00 mm, Height E2 = 22.00 mm. - **Bolt Circle Pattern:** Pitch circle diameter D5 = 47.50 mm, containing N = 9 evenly spaced through-holes each with diameter D3 = 9.01 mm. - **Lower Mounting Bosses (Ojal/Bases):** Left boss diameter D1 = 22.73 mm, Right boss diameter D2 = 45.45 mm, positioned symmetrically at an angle A1 = 30.00 degrees from the vertical centerline. - **Reinforcing Ribs:** Width L1 = 6.00 mm, blended into the bosses and hub with fillet radius R1 = 7.00 mm. - **Body Contours & Radii:** Outer side arcs radius R4 = 102.00 mm, main body spine radius R2 = 112.20 mm, and bottom central cutout arc radius R3 = 33.93 mm. - **Thicknesses & Heights (Z-axis dimensions):** Main base plate thickness E1 = 14.00 mm, right block height E4 = 23.00 mm, left block height E5 = 18.00 mm, lower positioning reference E3 = 21.00 mm, and internal step offsets E6 = 6.00 mm / E7 = 6.00 mm. Construct the geometry step by step: build the main plate with the lower bosses and cutout, extrude the central hub with its 9-hole circular pattern, add the structural ribs, and apply the correct step thicknesses.

Parameters

NameValueRange
Hub OD (D6)74.58 mm30 – 150
Through Bore (D4)25 mm5 – 60
Hub Height (E2)22 mm5 – 60
Bolt Circle PCD (D5)47.5 mm15 – 120
Bolt Hole Count (N)9 count3 – 24
Bolt Hole Diameter (D3)9.01 mm2 – 25
Left Boss Diameter (D1)22.73 mm5 – 80
Right Boss Diameter (D2)45.45 mm5 – 100
Boss Angle from Vertical (A1)30 deg5 – 80
Boss Pitch Radius62 mm30 – 110
Rib Width (L1)6 mm1 – 30
Rib Blend Fillet (R1)7 mm0 – 20
Rib / Position Ref Height (E3)21 mm5 – 60
Side Arc Radius (R4)102 mm40 – 250
Main Spine Radius (R2)112.2 mm40 – 300
Bottom Cutout Radius (R3)33.93 mm5 – 120
Base Plate Thickness (E1)14 mm2 – 50
Right Boss Height (E4)23 mm2 – 80
Left Boss Height (E5)18 mm2 – 80
Top Step / Counterbore (E6)6 mm1 – 12
Bottom Step / Counterbore (E7)6 mm1 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Bracket Plate with Central Hub and Lower Bosses - Free CAD Model (STEP, STL) | TextoCAD