Brackets and mounts
Bracket Plate with Central Hub and Bolt Circle
- Bounding box
- 105.5 × 112.4 × 33.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Please generate the precise 3D parametric CAD model for the mechanical bracket plate based on the provided engineering drawing, using these exact parameters for Row 6: - **Central Hub (Upper Cylinder):** Outer diameter D6 = 74.58 mm, Through-hole diameter D4 = 25.00 mm, Height E2 = 22.00 mm. - **Bolt Circle Pattern:** Pitch circle diameter D5 = 47.50 mm, containing N = 9 evenly spaced through-holes each with diameter D3 = 9.01 mm. - **Lower Mounting Bosses (Ojal/Bases):** Left boss diameter D1 = 22.73 mm, Right boss diameter D2 = 45.45 mm, positioned symmetrically at an angle A1 = 30.00 degrees from the vertical centerline. - **Reinforcing Ribs:** Width L1 = 6.00 mm, blended into the bosses and hub with fillet radius R1 = 7.00 mm. - **Body Contours & Radii:** Outer side arcs radius R4 = 102.00 mm, main body spine radius R2 = 112.20 mm, and bottom central cutout arc radius R3 = 33.93 mm. - **Thicknesses & Heights (Z-axis dimensions):** Main base plate thickness E1 = 14.00 mm, right block height E4 = 23.00 mm, left block height E5 = 18.00 mm, lower positioning reference E3 = 21.00 mm, and internal step offsets E6 = 6.00 mm / E7 = 6.00 mm. Construct the geometry step by step: build the main plate with the lower bosses and cutout, extrude the central hub with its 9-hole circular pattern, add the structural ribs, and apply the correct step thicknesses.
Parameters
| Name | Value | Range |
|---|---|---|
| Central Hub Outer Diameter D6 | 74.58 mm | 30 – 150 |
| Hub Through-Hole Diameter D4 | 25 mm | 5 – 80 |
| Hub Height E2 | 22 mm | 5 – 60 |
| Bolt Circle Pitch Diameter D5 | 47.5 mm | 20 – 120 |
| Bolt Hole Count N | 9 count | 3 – 24 |
| Bolt Hole Diameter D3 | 9.01 mm | 2 – 30 |
| Left Boss Diameter D1 | 22.73 mm | 8 – 80 |
| Right Boss Diameter D2 | 45.45 mm | 8 – 100 |
| Boss Angle from Vertical A1 | 30 deg | 0 – 80 |
| Boss Center Radius from Hub (Assumed) | 50 mm | 20 – 120 |
| Reinforcing Rib Width L1 | 6 mm | 2 – 25 |
| Rib Blend Fillet Radius R1 | 7 mm | 0.5 – 20 |
| Outer Side Arc Radius R4 | 102 mm | 40 – 300 |
| Main Body Spine Radius R2 | 112.2 mm | 40 – 300 |
| Bottom Central Cutout Arc Radius R3 | 33.93 mm | 5 – 80 |
| Main Base Plate Thickness E1 | 14 mm | 2 – 50 |
| Right Block Height E4 | 23 mm | 3 – 60 |
| Left Block Height E5 | 18 mm | 3 – 60 |
| Lower Positioning Reference E3 | 21 mm | 3 – 60 |
| Internal Step Offset E6 | 6 mm | 0.1 – 30 |
| Internal Step Offset E7 | 6 mm | 0.1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
