Enclosures and housings
Box Enclosure with Pocket Grid and Hinged Lid
- Bounding box
- 223.0 × 280.0 × 58.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular box enclosure, 220 mm long, 140 mm wide, 55 mm tall, with 2 mm wall thickness and 3 mm rounded edges. On top, in the front half (115 mm of the length), cut a 7 by 4 grid of rectangular pockets, 28 pockets total, each about 26 mm by 18 mm and 12 mm deep, with small gaps between them. In the rear half (105 mm of the length), leave an open compartment for electronics. Add a flat lid on top, 3 mm thick, hinged along one long edge, with a rectangular window cutout in the middle, about 190 mm by 130 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 220 mm | 100 – 400 |
| Box Width | 140 mm | 80 – 300 |
| Box Height | 55 mm | 20 – 150 |
| Wall Thickness | 2 mm | 1 – 10 |
| Edge Fillet | 3 mm | 0 – 10 |
| Front Section Length | 115 mm | 50 – 200 |
| Pocket Length | 26 mm | 10 – 50 |
| Pocket Width | 18 mm | 10 – 40 |
| Pocket Depth | 12 mm | 5 – 30 |
| Pocket Gap | 3 mm | 1 – 10 |
| Grid Columns | 7 | 1 – 10 |
| Grid Rows | 4 | 1 – 10 |
| Lid Thickness | 3 mm | 1 – 10 |
| Window Length | 190 mm | 50 – 220 |
| Window Width | 130 mm | 50 – 140 |
| Hinge Diameter | 6 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w