Brackets and mounts
Boîte outils biais couture (100% imprimée)
- Bounding box
- 214.8 × 193.0 × 21.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Boîte pour 8 outils de biais (8 à 25 mm), couvercle à charnière, emplacements gravés, sans aimants ni quincaillerie : fermeture à clip et axe imprimés.
Parameters
| Name | Value | Range |
|---|---|---|
| Longueur d'un outil | 65 mm | 30 – 120 |
| Epaisseur d'un outil pose a plat | 16 mm | 5 – 40 |
| Largeur outil = ratio x taille du biais + marge | 2 mm | 1 – 3 |
| Marge ajoutee a la largeur | 8 mm | 0 – 30 |
| Jeu autour de chaque outil | 0.6 mm | 0.2 – 2 |
| Cloison entre emplacements | 4 mm | 2 – 10 |
| Bord exterieur | 5 mm | 3 – 12 |
| Epaisseur du fond | 2 mm | 1.2 – 4 |
| Bande d'etiquette | 9 mm | 6 – 15 |
| Taille du texte | 5.5 mm | 3 – 8 |
| Profondeur de gravure | 0.8 mm | 0.6 – 1.5 |
| Encoche pour les doigts (mm, 0 = aucune) | 16 mm | 0 – 25 |
| Epaisseur du couvercle | 3 mm | 2.5 – 5 |
| Diametre de l'axe imprime | 3 mm | 2.5 – 4 |
| Jeu axe dans la boite (serrage) | 0.2 mm | 0 – 0.5 |
| Jeu axe dans le couvercle (rotation) | 0.5 mm | 0.3 – 1 |
| Jeu entre charnons | 0.4 mm | 0.2 – 1 |
| Nombre de charnons | 7 mm | 3 – 11 |
| Largeur du clip | 30 mm | 15 – 60 |
| Epaisseur de la languette | 1.6 mm | 1.2 – 3 |
| Descente de la languette | 8 mm | 5 – 15 |
| Saillie du cran | 0.8 mm | 0.4 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
