Brackets and mounts
BMX Aluminium Tube Bicycle Trailer
- Bounding box
- 1129.3 × 556.1 × 414.8 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
A bicycle trailer made from aluminum tubing that has an arm at the front in the middle that goes up and out to connect to the bicycle seat post. Must suit a small bmx bike. Must have a fold down flat design. Must have removable wheels and front stand to stop from falling when detached from the bike. Needs a quick release clamp for connecting to the seat post and the clamp attached to a 360° knuckle that is also attached to the arm at the front of the trailer.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck Length | 600 mm | 450 – 900 |
| Deck Width | 450 mm | 350 – 600 |
| Frame Tube OD | 20 mm | 12 – 35 |
| Deck Rail Height | 100 mm | 80 – 180 |
| Axle Diameter | 12 mm | 8 – 20 |
| Axle Stub Length | 52 mm | 30 – 80 |
| Wheel Side Clearance | 8 mm | 2 – 20 |
| Wheel Bore Clearance | 0.6 mm | 0.2 – 2 |
| Wheel Diameter | 200 mm | 120 – 300 |
| Wheel Width | 35 mm | 20 – 60 |
| Tow Arm Length | 500 mm | 350 – 700 |
| Tow Arm Rise Angle | 35 deg | 15 – 60 |
| 360 Knuckle Diameter | 35 mm | 20 – 50 |
| 360 Knuckle Height | 18 mm | 10 – 30 |
| Seat Post Diameter | 25.4 mm | 22.2 – 31.8 |
| Clamp Wall Thickness | 7 mm | 4 – 10 |
| Clamp Bore Clearance | 0.6 mm | 0.2 – 2 |
| Clamp Height | 28 mm | 15 – 40 |
| QR Lever Diameter | 10 mm | 6 – 14 |
| QR Lever Length | 28 mm | 15 – 45 |
| Front Stand Tube OD | 16 mm | 10 – 25 |
| Front Stand Foot Diameter | 35 mm | 20 – 50 |
| Front Stand Foot Thickness | 5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
