Brackets and mounts
BMW M4 RC Car - Exploded Multi-Part
- Bounding box
- 2297.5 × 120 × 55.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable RC car model, BMW M4. Total size: 220mm long x 120mm wide x 65mm high. IMPORTANT RULES: - NO GLASS, NO WINDSHIELD - Upper body must be 100% SOLID BLACK, no transparent parts, no windows cut out - Headlights and Taillights must be SEPARATE parts, NOT attached to body Split into 5 separate STL parts: 1. LOWER CHASSIS - 220 x 120mm, flat base, mounts for motor, ESP32, battery, 4 wheel axles. 2. UPPER BODY - Complete BMW M4 body, ONE single piece, ALL BLACK, 220 x 120mm, solid, closed roof, NO glass, NO window holes. With empty slots in front and back for lights. 4 screw holes to fit on chassis. 3. FRONT HEADLIGHTS - 2 separate pieces, left + right, fits into front slots of body. White / LED style. 4. REAR TAILLIGHTS - 2 separate pieces, left + right, fits into rear slots of body. Red style. 5. WHEELS x4 - Diameter 55mm, Width 25mm. Black rim + tire. All parts printable on 220 x 120mm bed, manifold STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis length | 220 mm | 180 – 300 |
| Chassis width | 120 mm | 80 – 220 |
| Chassis thickness | 10 mm | 6 – 20 |
| Body length | 220 mm | 180 – 300 |
| Body width | 120 mm | 80 – 220 |
| Body height | 55 mm | 35 – 100 |
| Lower body side height | 20 mm | 12 – 40 |
| Wheel diameter | 55 mm | 35 – 100 |
| Wheel width | 25 mm | 10 – 50 |
| Wheel axle hole diameter | 5 mm | 3 – 10 |
| Headlight length X | 18 mm | 14 – 30 |
| Headlight width Y | 10 mm | 8 – 20 |
| Headlight depth Z | 6 mm | 4 – 12 |
| Taillight length X | 16 mm | 12 – 30 |
| Taillight width Y | 8 mm | 6 – 20 |
| Taillight depth Z | 5 mm | 3 – 10 |
| Body mounting screw hole diameter | 3.4 mm | 3 – 6 |
| Exploded layout gap | 240 mm | 200 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
