Enclosures and housings
Block with Through Hole, Fillets, and Chamfer
- Bounding box
- 100.0 × 60.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3-D workspace with multi-view projection setup (top, front, side, and isometric viewports). Draw a base solid box with dimensions 100mm x 60mm x 20mm on the XY plane.Set working plane to top face. Insert a 30mm diameter cylinder positioned at center, and subtract it from the base block to create a clean hole.Apply 5mm radius fillets to all top outer edges and add a 2mm chamfer to the inner cylindrical cut out.ssign Structural Steel material properties (density 7.85 g/cm³) to calculate total mass, volume, surface area, and center of gravity.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 100 mm | 20 – 500 |
| Box Width | 60 mm | 10 – 300 |
| Box Height | 20 mm | 5 – 100 |
| Hole Diameter | 30 mm | 5 – 50 |
| Top Edge Fillet Radius | 5 mm | 0.1 – 12 |
| Inner Chamfer Size | 2 mm | 0.1 – 5 |
| Material Density | 7.85 g/cm³ | 0.1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox