Enclosures and housings
Blended-Wing Faceted UAV Hull
- Bounding box
- 900.0 × 550.0 × 95.1 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric blended-wing faceted UAV hull. Overall dimensions: 550 mm length along Y-axis, 900 mm total wingspan along X-axis, 95 mm height along Z-axis. The leading edges and trailing edges must be aligned to a 35-degree sweep angle relative to the Y-centerline. The top profile is completely flat (0 degrees dihedral). The bottom profile features lower angled facets sloping inward at a 12-degree angle toward a central flat keel line. Shell the main body with a uniform wall thickness of 1.5 mm. In the center rear section, add an internal cylindrical vertical duct cutout with a diameter of 200 mm and a depth of 95 mm, passing completely through the top and bottom surfaces of the hull. Add a rectangular recessed hatch on the top surface measuring 180 mm by 120 mm with 3 mm edge fillets, aligned parallel to the 35-degree leading edge sweep.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (Y) | 550 mm | 300 – 900 |
| Wingspan (X) | 900 mm | 500 – 1600 |
| Hull Height (Z) | 95 mm | 40 – 200 |
| Center Body Width | 300 mm | 220 – 700 |
| LE / TE Sweep Angle | 35 deg | 10 – 60 |
| Flat Keel Width | 120 mm | 20 – 300 |
| Bottom Facet Angle | 12 deg | 2 – 30 |
| Wall Thickness | 1.5 mm | 0.8 – 4 |
| Duct Diameter | 200 mm | 50 – 280 |
| Duct Center (Y) | 150 mm | -260 – 260 |
| Hatch Length | 180 mm | 40 – 260 |
| Hatch Width | 120 mm | 40 – 200 |
| Hatch Recess Depth | 1 mm | 0.5 – 3 |
| Hatch Corner Fillet | 3 mm | 0 – 15 |
| Hatch Center (Y) | -100 mm | -260 – 260 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no