Enclosures and housings
Biyos Logo NFC Enclosure (4-part)
- Bounding box
- 247.7 × 47.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create an exact 3D printable extrusion of the uploaded Biyos logo image. CRITICAL: This is an exact image-to-3D conversion task, NOT a logo redesign. The uploaded image is the single source of truth. 1. Trace the EXACT blue outer silhouette from the uploaded image. Preserve the pointed roof, straight side edges, lower corners and original proportions. Do not turn it into a teardrop, oval, circle or generic house shape. 2. Trace the EXACT white smile from the image using smooth cubic Bézier curves. Preserve BOTH the upper and lower curved boundaries, varying thickness, tapered ends and precise position. Do not replace it with an arc, crescent, ellipse, rounded rectangle or simplified smile. 3. Use closed vector contours for both shapes and extrude them into real watertight 3D solids. Use high-resolution smooth curves without visible polygon edges. 4. Scale the complete original silhouette proportionally to fit within 50 × 50 mm. Do not distort its aspect ratio. 5. Create a blue enclosure with 6 mm total assembled thickness. 6. Reproduce the original white smile as a separate flush-fitting insert on BOTH front and back faces. Both sides must look exactly like the uploaded image. 7. Add one 3.5 mm diameter screw hole, centered slightly below the top roof peak, without changing the external silhouette. 8. Add a hidden internal circular cavity, 26 mm diameter, for a 25 mm NTAG213 NFC sticker. Ensure the screw hole and NFC cavity do not intersect. 9. Split the enclosure into a front shell and rear shell with suitable assembly tolerances. Keep the original logo shape on both external faces. 10. Export separate printable STL files for the blue shells and white smile inserts, plus STEP if available. STRICT VALIDATION: The assembled model's front orthographic silhouette and white smile must visually match the uploaded image when overlaid at the same scale. Do not invent decorative curves, rings, circles, bumps, or any additional visible shapes. Internal NFC and assembly features must remain hidden. If exact image tracing or use of image vector paths is not supported, state that limitation instead of approximating the logo. Show the assembled front orthographic view, back view, side view and exploded assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Logo Width | 46 mm | 20 – 50 |
| Logo Height | 47 mm | 20 – 50 |
| Roof Drop From Peak | 18.5 mm | 6 – 40 |
| Bottom Corner Radius | 2.3 mm | 0.4 – 8 |
| Shell Thickness | 3 mm | 1.5 – 5 |
| Screw Hole Dia | 3.5 mm | 2 – 5 |
| Screw Hole Below Peak | 6.5 mm | 3 – 15 |
| NFC Cavity Dia | 26 mm | 10 – 34 |
| NFC Cavity Height | 18 mm | 13 – 30 |
| NFC Pocket Per Shell | 1 mm | 0.4 – 1.8 |
| Alignment Pin Dia | 1.5 mm | 0.8 – 3 |
| Alignment Pin Length | 1 mm | 0.5 – 2 |
| Pin Offset X | 15 mm | 5 – 20 |
| Pin Offset Y | 6 mm | 2.5 – 12 |
| Assembly Clearance | 0.15 mm | 0 – 0.4 |
| Smile Recess Clearance | 0.15 mm | 0 – 0.35 |
| Smile Span (tip to tip) | 29.4 mm | 10 – 40 |
| Smile Thickness at Centre | 6.8 mm | 1 – 12 |
| Smile Tip Rise | 3.8 mm | 0 – 10 |
| Smile Centre Height | 9.7 mm | 3 – 30 |
| Insert / Recess Depth | 1 mm | 0.6 – 1.5 |
| Exploded Layout Gap | 70 mm | 50 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
