Enclosures and housings
BirdID Logger Enclosure
- Bounding box
- 331.0 × 248.7 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 56
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted BirdID Logger Enclosure: layout=1
Parameters
| Name | Value | Range |
|---|---|---|
| Layout (0 assembled, 1 print) | 1 | 0 – 1 |
| Show reference envelopes | 1 | 0 – 1 |
| Cavity width (x) | 110 mm | 90 – 160 |
| Cavity height (y) | 95 mm | 80 – 150 |
| Usable depth (rear wall to lid lip) | 35 mm | 25 – 60 |
| Cavity corner radius | 3 mm | 1 – 8 |
| Side wall | 3 mm | 2 – 5 |
| Rear wall | 3 mm | 2 – 5 |
| Flange width from cavity edge | 12 mm | 9 – 20 |
| Flange thickness | 5 mm | 3 – 10 |
| Lid thickness | 3 mm | 2 – 6 |
| Lid alignment lip depth | 4 mm | 2 – 8 |
| Lid lip thickness | 1.6 mm | 1 – 3 |
| Lip clearance per side | 0.3 mm | 0.1 – 0.8 |
| Gasket groove width | 2.6 mm | 1.5 – 4 |
| Gasket groove depth | 1.5 mm | 0.8 – 3 |
| Groove centreline offset from cavity | 4.5 mm | 3.5 – 8 |
| Lid screw offset from cavity corner | 7 mm | 6 – 12 |
| Screw column radius | 4.5 mm | 3.5 – 6 |
| Lid screw clearance hole | 3.4 mm | 2.2 – 5 |
| Insert / pilot hole dia (M3 insert) | 4 mm | 2 – 5.5 |
| Insert hole depth | 6 mm | 3 – 12 |
| Feather PCB left edge x | 8 mm | 7 – 20 |
| Feather PCB bottom edge y | 23 mm | 15 – 35 |
| Tray thickness | 2 mm | 1.5 – 4 |
| Tray boss height above rear wall | 4 mm | 3 – 8 |
| Tray screw clearance hole | 3.4 mm | 2.2 – 4.5 |
| Feather standoff above tray (min 3) | 4 mm | 3 – 12 |
| Stack height reserve above tray (unconfirmed) | 25 mm | 15 – 30 |
| Feather post diameter | 4.6 mm | 3.6 – 5 |
| Feather post pilot (M2 self-tap) | 1.6 mm | 1.4 – 3.2 |
| Battery bay left x | 42 mm | 36 – 50 |
| Battery bay bottom y | 22 mm | 15 – 30 |
| Battery bay width (x) | 56 mm | 30 – 60 |
| Battery bay length (y) | 70 mm | 30 – 70 |
| Battery bay depth (z) | 12 mm | 5 – 25 |
| Battery strap opening | 22 mm | 10 – 26 |
| Battery strap centre y | 52 mm | 36 – 75 |
| Acoustic port x | 72.5 mm | 62 – 83 |
| Acoustic port z | 15 mm | 12 – 22 |
| Acoustic port dia | 2 mm | 1 – 4 |
| Mic PCB size (unconfirmed) | 14 mm | 10 – 20 |
| Mic PCB thickness | 1 mm | 0.6 – 1.8 |
| Gasket seat pad height | 1 mm | 0.5 – 3 |
| Mic gasket compressed thickness | 1 mm | 0.3 – 3 |
| Mic bracket boss height | 4 mm | 3 – 6 |
| Mic bracket slot adjustment (+/-) | 2 mm | 0.5 – 3 |
| Membrane seat / foam spigot dia | 14 mm | 10 – 20 |
| Spigot length | 4 mm | 2.5 – 10 |
| Foam retention groove width | 1.2 mm | 0.8 – 2.5 |
| Foam retention groove depth | 0.8 mm | 0.4 – 1.5 |
| Strap slot length | 22 mm | 15 – 40 |
| Strap slot width | 3 mm | 2 – 6 |
| Strap loop projection | 14 mm | 11 – 22 |
| Strap loop length | 36 mm | 28 – 60 |
| Strap loop height from rear | 12 mm | 6 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no