Brackets and mounts
Bird Monitoring Enclosure
- Bounding box
- 200 × 140 × 53 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 200 × 140 × 50 mm rectangular electronics enclosure for an outdoor bird monitoring system. Use 3 mm walls and 4 mm base, with slightly rounded corners and a removable flat lid. Add exactly 4 internal M3 screw posts near the corners for the lid. Also add exactly 4 separate 4 mm diameter holes through the bottom for wall/pole mounting, one near each corner. Keep the interior flat and mostly open with no extra PCB holes, slots, vents, or decorative cutouts. Add one small cable-entry hole and one 4G antenna cable hole on the side. The enclosure must have enough space for an ESP32-S3, A7670C 4G module, INMP441 microphone, battery, power converter and wiring, with 5–10 mm clearance. Make it simple, strong and 3D-printable.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width | 200 mm | 100 – 400 |
| Outer depth | 140 mm | 80 – 300 |
| Body height | 50 mm | 30 – 120 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Base thickness | 4 mm | 2 – 10 |
| Corner radius | 6 mm | 0 – 20 |
| Lid thickness | 3 mm | 1.5 – 8 |
| Post center inset from outer edge | 15 mm | 8 – 40 |
| Post diameter | 8 mm | 5 – 15 |
| M3 pilot hole diameter | 2.6 mm | 2 – 4 |
| Lid screw clearance hole | 3.4 mm | 3 – 5 |
| Bottom mounting hole diameter | 4 mm | 3 – 8 |
| Mounting hole inset from outer edge | 8 mm | 4 – 25 |
| Cable entry hole diameter | 8 mm | 4 – 20 |
| Cable hole X position | -50 mm | -90 – 90 |
| Cable hole Z position | 25 mm | 8 – 42 |
| Antenna cable hole diameter | 6 mm | 4 – 15 |
| Antenna hole Y position | 20 mm | -60 – 60 |
| Antenna hole Z position | 25 mm | 8 – 42 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o