Enclosures and housings
Biotelemetry Prototype Assembly
- Bounding box
- 120.0 × 80.0 × 73.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D CAD model of a student prototype for: “AI-Driven Adaptive Biotelemetry System for Early Detection of Patient Deterioration in Remote Healthcare.” Use mm units. Create a simple rectangular cardboard-style enclosure: - 120 mm × 80 mm × 50 mm - 3 mm wall thickness - removable top cover - slightly rounded edges On the top, expose ONLY two sensors: 1. MAX30102 heart-rate/SpO2 sensor — small rectangular module on the left. 2. DS18B20 temperature probe — small cylindrical probe on the right. Keep both sensors aligned on the top with approximately 25 mm spacing. Inside the enclosure, include simplified representations of: - ESP8266 NodeMCU - small breadboard - buzzer - jumper wires connecting the sensors to the NodeMCU. Keep electronics simple and mostly inside the enclosure. Only the MAX30102 and DS18B20 should protrude through the top. Do NOT add OLED, DHT11, DHT22, MQ-135, buttons, LEDs, batteries or other unnecessary components. Create clean, separate CAD bodies for the enclosure, top cover, sensors and electronics. Make the final model suitable for Fusion 360 and college project submission. Generate an isometric view with realistic prototype proportions.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 120 mm | 80 – 200 |
| Enclosure Width | 80 mm | 50 – 150 |
| Enclosure Height | 50 mm | 30 – 100 |
| Wall Thickness | 3 mm | 1 – 5 |
| Edge Radius | 2 mm | 0 – 4 |
| Cover Thickness | 3 mm | 1 – 5 |
| MAX30102 Size | 14 mm | 10 – 20 |
| MAX30102 Thickness | 1.6 mm | 0.8 – 3 |
| Sensor Pad Size | 5 mm | 3 – 10 |
| Sensor Pad Thickness | 0.5 mm | 0.2 – 1 |
| DS18B20 Diameter | 6 mm | 3 – 10 |
| DS18B20 Length | 25 mm | 15 – 50 |
| Sensor Spacing | 25 mm | 15 – 40 |
| ESP8266 Length | 58 mm | 40 – 80 |
| ESP8266 Width | 31 mm | 20 – 50 |
| ESP8266 Height | 12 mm | 5 – 20 |
| Breadboard Length | 45 mm | 30 – 80 |
| Breadboard Width | 35 mm | 20 – 60 |
| Breadboard Thickness | 2 mm | 1 – 5 |
| Buzzer Diameter | 12 mm | 8 – 20 |
| Buzzer Height | 9 mm | 5 – 15 |
| Wire Count | 5 count | 4 – 6 |
| Wire Radius | 0.8 mm | 0.3 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox