Enclosures and housings
Biomimetic Wildflower Pulp Tile
- Bounding box
- 115.5 × 100.0 × 10.1 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a fully editable, manufacturable 3D CAD model of a biomimetic wildflower planting tile for End With A Bloom. Overall structure * Regular hexagon, 100 mm across flats. * Solid recycled egg-carton pulp construction. * Approximately 8–10 mm thick. * Rounded external edges. * Relatively flat underside for ground contact. Biomimetic upper surface Create an organically undulating surface inspired by natural grassland soil microtopography. Incorporate: * 10–15 shallow, rounded hemispherical depressions distributed across the surface. * Subtle, gently raised hummock-like areas between depressions. * Fine, shallow, branching microchannels connecting selected depressions. * Smooth transitions between all features. * Natural-looking variation without excessive irregularity. The depressions should be concave rather than raised. Channels must be subtle and must not compromise the tile’s structural thickness. Manufacturing requirements The tile will be formed by pressing wet recycled egg-carton pulp, containing wildflower seeds mixed throughout, into a 3D-printed mould. Therefore: * Maintain a solid structure. * No open lattice or hollow framework. * No individual seed compartments. * Avoid undercuts and sharp internal corners. * Ensure the geometry can release from a practical mould. * Maintain sufficient material thickness beneath every depression and channel. Required outputs Produce: 1. A complete editable 3D tile model. 2. A corresponding mould design. 3. Top, side and isometric views. 4. A cross-section showing material thickness. 5. STL files for 3D printing and STEP files where supported. Use parametric dimensions so depression depth, channel dimensions and tile thickness can be adjusted. Design objective: Create a sophisticated, functional interpretation of natural meadow microtopography, translating hummocks, hollows and surface-water pathways into a manufacturable biodegradable wildflower tile. Prioritise ecological plausibility, structural integrity and ease of production over decorative complexity.
Parameters
| Name | Value | Range |
|---|---|---|
| Across Flats | 100 mm | 60 – 200 |
| Tile Thickness | 9 mm | 6 – 16 |
| Edge Radius | 1.5 mm | 0.3 – 3 |
| Hollow Count | 12 | 10 – 15 |
| Hollow Diameter | 14 mm | 8 – 26 |
| Hollow Depth | 2.5 mm | 0.5 – 4 |
| Microchannel Count | 8 | 0 – 16 |
| Channel Width | 3 mm | 1 – 6 |
| Channel Depth | 1 mm | 0.3 – 2 |
| Hummock Count | 6 | 0 – 12 |
| Hummock Diameter | 16 mm | 8 – 30 |
| Hummock Height | 0.9 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
