Brackets and mounts
Bike Bag Holder Box
- Bounding box
- 266 × 266 × 115.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable bicycle bag holder box with the following specifications: Main Box: Inside dimensions: 250 mm length, 250 mm width. Wall height: 75 mm. Wall thickness: 4 mm. Bottom plate thickness: 4 mm. Add a grid of 6 mm drainage holes evenly spaced across the bottom plate to allow water to drain out. Mounting Tube (Square Sleeve): Attached centered under the bottom of the main box. Inside dimensions (hollow profile): 30 mm x 30 mm square tube. Tube length: 100 mm along the bottom. Tube wall thickness: 4 mm. Include one M6 threaded hole (or a 6.5 mm clearance hole for a clamping screw) on the bottom surface of the square tube, centered, to clamp it onto the metal bike bar.
Parameters
| Name | Value | Range |
|---|---|---|
| Inside length | 250 mm | 100 – 400 |
| Inside width | 250 mm | 100 – 400 |
| Inside wall height | 75 mm | 30 – 200 |
| Wall thickness | 4 mm | 1.2 – 8 |
| Bottom plate thickness | 4 mm | 1.2 – 8 |
| Rolled top rim lip width | 4 mm | 0 – 10 |
| Drain hole diameter | 6 mm | 2 – 12 |
| Hole grid pitch | 45 mm | 15 – 80 |
| Holes per row / column | 5 mm | 1 – 9 |
| Square tube inside size | 30 mm | 15 – 60 |
| Tube wall thickness | 4 mm | 1.2 – 8 |
| Tube length | 100 mm | 40 – 200 |
| Clamp screw clearance dia | 6.5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o