3D preview of Bicycle Diamond Frame
Loading the interactive model…
Interactive 3D model of Bicycle Diamond Frame

Enclosures and housings

Bicycle Diamond Frame

1 views
Bounding box
933.6 × 152.0 × 558.6 mm
Engine
Precision B-rep
Parameters
26
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

1. Frame Reference: the diamond frame diagram from the images I pulled earlier. Sketch the centerline skeleton on the XY plane using the coordinates above (BB, both axles, seat tube top, head tube top and bottom). Sweep a circle along each line. Tube sizes: top 35 OD, down tube 40 OD, seat tube 31.8 OD with 27.4 ID, chainstays 22 OD, seatstays 16 OD, all around 2 wall. Extrude the head tube (48 OD, 44 ID, 120 long) along the 70° axis and the BB shell (40 OD, 68 wide). Make the stays on one side, then mirror them about the center plane. Chainstays should be about 100 apart at the BB. Add dropout plates (4 thick, 10 slot) at the rear axle, then fillet the joints.

Parameters

NameValueRange
Top tube OD35 mm10 – 80
Down tube OD40 mm10 – 90
Seat tube OD31.8 mm10 – 80
Seat tube ID27.4 mm5 – 70
Chainstay OD22 mm5 – 50
Seatstay OD16 mm5 – 40
Head tube OD48 mm10 – 100
Head tube ID44 mm5 – 90
Tube wall2 mm0.5 – 10
Head tube length120 mm20 – 300
Head tube angle70 deg40 – 90
Seat tube length545 mm100 – 900
Seat tube angle73 deg40 – 90
Head tube bottom X440 mm0 – 800
Head tube bottom Z350 mm0 – 800
Chainstay length410 mm100 – 700
BB shell OD40 mm10 – 100
BB shell width68 mm20 – 150
Chainstay gap at BB90 mm20 – 200
Chainstay gap at axle130 mm20 – 250
Seatstay gap at seat40 mm10 – 150
Seatstay gap at axle130 mm20 – 250
Dropout thickness4 mm1 – 20
Dropout slot / hole10 mm2 – 30
Dropout length40 mm10 – 100
Dropout height30 mm10 – 100

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Bicycle Diamond Frame - Free CAD Model (STEP, STL) | TextoCAD