80.0180.014.0
Loading the interactive model…
Interactive 3D model of Bicycle Bracket Adapter Plate

Brackets and mounts

Bicycle Bracket Adapter Plate

1 views
Bounding box
180.0 × 80.0 × 14.0 mm
Engine
Precision B-rep
Parameters
9
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a sturdy 3D-printable mounting adapter plate for a bicycle front bracket with a completely flat bottom face. Outer dimensions: 180 mm long (front-to-back) and 80 mm wide (side-to-side). The rear 148 mm section is a flat plate 6 mm thick to mount underneath a cargo box. The front 32 mm section (which sits on the bicycle bracket) is thicker on top, measuring 14 mm tall with the same continuous flat bottom face across the entire 180 mm length, creating an 8 mm vertical step on top softened with a 4 mm fillet radius at the inner corner. Through this thick front 32 mm section, drill two vertical through-holes of 6.4 mm diameter spaced 60 mm apart side-to-side (center-to-center, leaving 10 mm margin from each 80 mm side edge), positioned 20 mm from the front edge and 12 mm from the step. Clean manifold geometry, completely flat bottom, suitable for FDM 3D printing on its side without supports.

Parameters

NameValueRange
Total Length180 mm100 – 300
Width80 mm40 – 150
Front Section Length32 mm20 – 60
Rear Plate Thickness6 mm2 – 15
Front Section Thickness14 mm8 – 30
Hole Diameter6.4 mm3 – 12
Hole Spacing (Y)60 mm20 – 120
Hole Dist from Front20 mm5 – 50
Step Fillet Radius4 mm0 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Bicycle Bracket Adapter Plate - Free CAD Model (STEP, STL) | TextoCAD