Enclosures and housings
Beer Olympics Trophy
- Bounding box
- 2345.0 × 185.0 × 197.0 mm
- Engine
- Precision B-rep
- Parameters
- 45
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 305 mm tall championship trophy designed for FDM 3D printing on a Bambu X1C. The trophy has a two-tier circular base (180 mm bottom tier, 145 mm upper tier) with a recessed slide-in plaque slot (110 × 45 mm) on the front and a hidden storage compartment in the underside. Add a 75 mm tall pedestal supporting a classic trophy cup. The cup must contain a cylindrical cavity 68 mm in diameter and 128 mm deep to hold a standard US 12 oz beverage can. Add two traditional trophy handles decorated with hop vines and barley. Create overflowing beer foam as a separate printable body with four drips. Replace Olympic rings with five overlapping beer bottle caps (34 mm diameter each) as separate bodies for multicolor printing. Add raised text "BEER OLYMPICS CHAMPION" on the front plaque area, leaving the year for the removable insert. Split the design into print-friendly components with approximately 3.2 mm wall thickness, alignment pins, and threaded joints where appropriate.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap (X-spacing) | 200 mm | 100 – 500 |
| Base bottom Ø | 180 mm | 100 – 250 |
| Base upper Ø | 145 mm | 100 – 200 |
| Base bottom height | 40 mm | 10 – 100 |
| Base upper height | 40 mm | 10 – 100 |
| Plaque slot width | 110 mm | 80 – 200 |
| Plaque slot height | 45 mm | 30 – 80 |
| Plaque slot depth | 3 mm | 1 – 10 |
| Storage compartment Ø | 120 mm | 80 – 170 |
| Storage compartment depth | 30 mm | 10 – 50 |
| Base alignment pin Ø | 5 mm | 3 – 10 |
| Base alignment pin height | 10 mm | 5 – 20 |
| Base edge fillet | 2 mm | 0 – 5 |
| Pedestal Ø | 65 mm | 40 – 100 |
| Pedestal height | 75 mm | 40 – 120 |
| Pedestal peg Ø | 10 mm | 5 – 20 |
| Pedestal peg height | 8 mm | 4 – 15 |
| Cup height | 150 mm | 100 – 250 |
| Cup top outer Ø | 100 mm | 60 – 150 |
| Cup bottom outer Ø | 70 mm | 40 – 100 |
| Can cavity Ø | 68 mm | 50 – 80 |
| Can cavity depth | 128 mm | 80 – 140 |
| Handle peg Ø | 5 mm | 3 – 8 |
| Handle peg depth | 8 mm | 4 – 15 |
| Cup bottom peg hole clearance | 10.5 mm | 8 – 15 |
| Handle width (vertical) | 90 mm | 50 – 150 |
| Handle protrusion | 50 mm | 20 – 80 |
| Handle bar Ø | 8 mm | 4 – 15 |
| Handle attachment peg length | 10 mm | 5 – 20 |
| Foam topper Ø | 100 mm | 60 – 150 |
| Foam topper height | 40 mm | 20 – 60 |
| Drip blob radius | 6 mm | 3 – 15 |
| Bottle cap Ø | 34 mm | 20 – 50 |
| Bottle cap thickness | 5 mm | 2 – 10 |
| Cap attachment peg Ø | 4 mm | 2 – 8 |
| Cap peg height | 5 mm | 3 – 10 |
| Cap ring horizontal spacing | 25 mm | 15 – 40 |
| Cap ring vertical offset | 30 mm | 15 – 50 |
| Plaque width | 110 mm | 60 – 200 |
| Plaque height | 45 mm | 30 – 80 |
| Plaque thickness | 3 mm | 2 – 6 |
| Year pocket width | 30 mm | 10 – 50 |
| Year pocket height | 12 mm | 5 – 20 |
| Year pocket depth | 1.5 mm | 0.5 – 3 |
| Cup rim fillet | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no