Brackets and mounts
Bearista Knit Cup Holder
- Bounding box
- 120.2 × 95.7 × 93.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
tolong buatkan design cup holder mobil starbucks bearista. dinding bagian luar motif weive. masukan juga tulisan SISIL pada dinging luar bagian depan kanan.
Parameters
| Name | Value | Range |
|---|---|---|
| Cup well inner diameter | 78 mm | 50 – 100 |
| Cup well depth | 78 mm | 40 – 120 |
| Base floor thickness | 4 mm | 2 – 10 |
| Wall thickness | 2.4 mm | 1.2 – 6 |
| Bottom edge chamfer | 1.2 mm | 0 – 3 |
| Top rim rounding | 1.5 mm | 0 – 2.3 |
| Stitches around the outside | 28 mm | 8 – 64 |
| Stitch rows on the wall | 11 mm | 3 – 24 |
| Stitch bump height | 1.2 mm | 0.3 – 2.5 |
| Stitch slant angle | 25 deg | 0 – 45 |
| Wall pattern 0=knit 1=weave | 1 mm | 0 – 1 |
| Weave cells around the outside | 20 mm | 8 – 64 |
| Weave rows on the wall | 9 mm | 3 – 30 |
| Weave bump height | 1 mm | 0.2 – 2.5 |
| Weave strand slant | 22 deg | 0 – 45 |
| Ear diameter | 26 mm | 12 – 40 |
| Ear thickness | 11 mm | 4 – 20 |
| Muzzle width | 40 mm | 16 – 70 |
| Muzzle height | 26 mm | 10 – 50 |
| Muzzle protrusion | 10 mm | 2 – 20 |
| Eye diameter | 9 mm | 4 – 16 |
| Eye spacing | 15 mm | 5 – 30 |
| Letter height | 9 mm | 4 – 20 |
| Text centre height | 66 mm | 10 – 120 |
| Text centre angle (deg, 90 = front) | 45 mm | -180 – 180 |
| Raised letter height | 1.2 mm | 0.6 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
