Enclosures and housings
Bearing Housing Block
- Bounding box
- 120.0 × 96.0 × 62.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Study the attached engineering drawing and recreate the depicted mechanical component as a precise 3D CAD model. First, inspect the image and identify the visible geometry, dimensions, cylindrical bosses, holes, central cylindrical body, inclined reinforcing ribs, and connecting surfaces. Use the dimensions explicitly shown in the drawing. Preserve the component's proportions and feature locations. Do not invent missing dimensions; state any assumptions clearly. Create a watertight solid suitable for mechanical engineering applications. Prefer a parametric, feature-based model using sketches, extrusions, holes, and ribs wherever supported. Export the finished model as a STEP (.step or .stp) file that can be imported into PTC Creo Parametric. Also provide an isometric preview and orthographic front, top, and left-side views. Before finishing, check the model for missing features, blocked holes, disconnected solids, and dimensional inconsistencies. If any part of the image is unclear, ask for clarification rather than guessing.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 120 mm | 80 – 300 |
| Base Width | 80 mm | 50 – 200 |
| Base Thickness | 12 mm | 5 – 30 |
| Hub Diameter | 60 mm | 40 – 120 |
| Bore Diameter | 30 mm | 10 – 45 |
| Hub Height | 50 mm | 20 – 100 |
| Boss Diameter | 22 mm | 12 – 40 |
| Boss Height | 18 mm | 10 – 40 |
| Bolt Hole Diameter | 9 mm | 4 – 20 |
| Boss Spacing | 90 mm | 50 – 160 |
| Rib Thickness | 8 mm | 4 – 20 |
| Rib Length | 18 mm | 8 – 40 |
| Rib Height | 30 mm | 10 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no