Enclosures and housings
Battery Enclosure Chassis Frame
- Bounding box
- 500.0 × 230.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- October 3, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular steel battery enclosure chassis for an electric scooter. Outer dimensions are exactly 500mm length, 230mm width, and 100mm height. The frame walls must be modeled with 40x20mm steel rectangular profiles. Inside is hollow to accommodate electrical components. Output as a clean mechanical STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 500 mm | 300 – 800 |
| Outer Width | 230 mm | 150 – 400 |
| Outer Height | 100 mm | 60 – 200 |
| Profile Width (20 mm side) | 20 mm | 10 – 40 |
| Profile Height (40 mm side) | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no