Brackets and mounts
Basement-2 27-Seat Committee Boardroom
- Bounding box
- 8130 × 7500 × 3150 mm
- Engine
- 3D Printing B-rep
- Parameters
- 39
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Section 1 – Room shell, raised floor, seating & video wallCreate a 3D model of a Basement-2 27-seater committee boardroom.Room envelope: rectangular, 8130 mm wide (front wall 1041 mm left + 6050 mm main + 1041 mm right) by approximately 7500 mm deep. Finished floor is raised access flooring (200 mm void) on a concrete slab. Ceiling is a suspended grid with deep service void above. Include stepped access at the room edge.Seating: 27 desks arranged in 4–5 rows facing the front wall, with a central aisle. Each desk has a removable panel, cable grommet and pop-up power unit.Front video wall: large multi-panel display on the 6050 mm front wall, approx. 5200 mm wide × 1400 mm high, black bezels, mounted above desk height. Add wall-mounted and ceiling-hung TV monitors on the side walls and over the seating.
Parameters
| Name | Value | Range |
|---|---|---|
| Room width | 8130 mm | 4000 – 12000 |
| Room depth | 7500 mm | 3000 – 12000 |
| Wall height above slab | 3000 mm | 2200 – 4000 |
| Wall thickness | 150 mm | 80 – 300 |
| Entrance door height | 2100 mm | 1800 – 2600 |
| Concrete slab thickness | 150 mm | 80 – 300 |
| Raised floor service void | 200 mm | 50 – 600 |
| Floor tile module | 600 mm | 300 – 1200 |
| Floor tile thickness | 30 mm | 15 – 60 |
| Service void above ceiling | 300 mm | 100 – 800 |
| Ceiling tile module | 600 mm | 300 – 1200 |
| Grid bar width | 24 mm | 10 – 60 |
| Grid bar depth below tiles | 40 mm | 10 – 120 |
| Video wall width | 5200 mm | 1000 – 8000 |
| Video wall height | 1400 mm | 400 – 3000 |
| Bottom edge above finished floor | 900 mm | 200 – 2000 |
| Video wall depth off wall | 120 mm | 40 – 300 |
| Display panels across | 8 mm | 1 – 16 |
| Display panels high | 4 mm | 1 – 8 |
| Bezel width between panels | 14 mm | 4 – 40 |
| Monitor width | 1600 mm | 400 – 3000 |
| Monitor height | 900 mm | 300 – 2000 |
| Monitor depth | 80 mm | 30 – 200 |
| Monitor centre above finished floor | 1500 mm | 600 – 2600 |
| Monitor width | 1400 mm | 400 – 3000 |
| Monitor height | 800 mm | 300 – 2000 |
| Monitor depth | 80 mm | 30 – 200 |
| Monitor centre height above slab | 2350 mm | 1200 – 2800 |
| Downward tilt toward audience | 25 deg | 0 – 60 |
| Monitor centre Y offset | 1200 mm | -2000 – 3400 |
| Desk width | 1200 mm | 600 – 2000 |
| Desk depth | 600 mm | 400 – 1200 |
| Desk height above finished floor | 750 mm | 600 – 1100 |
| Gap between adjacent desks | 20 mm | 0 – 100 |
| Gap between desk rows | 350 mm | 100 – 1200 |
| Central aisle width | 500 mm | 300 – 2000 |
| Step unit width | 1200 mm | 600 – 2400 |
| Step unit depth | 1000 mm | 500 – 2000 |
| Safety nosing overhang | 40 mm | 10 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl