Brackets and mounts
Baseball Bat Display Case
- Bounding box
- 220 × 163 × 1000 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
• Height: 1,000 mm (gives ample breathing room above the handle and below the toe for a ~900 mm bat). • Width: 200 mm to 240 mm (allows space for the 10.7 cm bat width plus mounting clips or a small plaque). • Depth: 140 mm to 200 mm can you draw these up as plans for me
Parameters
| Name | Value | Range |
|---|---|---|
| Overall height | 1000 mm | 600 – 1200 |
| Overall width | 220 mm | 180 – 260 |
| Frame depth | 150 mm | 120 – 200 |
| Back panel thickness | 12 mm | 6 – 20 |
| Wall-mount slot width | 5 mm | 3 – 9 |
| Wall-mount slot length | 26 mm | 12 – 60 |
| Slot centre inset from side edge | 40 mm | 20 – 80 |
| Slot centre below top edge | 60 mm | 20 – 250 |
| Side rail width | 16 mm | 8 – 30 |
| Top / bottom cap height | 18 mm | 10 – 40 |
| Acrylic thickness | 5 mm | 3 – 10 |
| Acrylic width - seats 0.5 mm into each rail | 189 mm | 150 – 250 |
| Acrylic height | 950 mm | 400 – 1150 |
| Acrylic inset from frame front | 10 mm | 0 – 50 |
| Clip width | 45 mm | 30 – 70 |
| Clip depth | 35 mm | 22 – 60 |
| Clip height | 35 mm | 15 – 60 |
| Bat bore diameter | 33 mm | 20 – 60 |
| Lower clip centre height | 250 mm | 50 – 900 |
| Upper clip centre height | 720 mm | 100 – 950 |
| Plaque width | 90 mm | 40 – 200 |
| Plaque height | 35 mm | 15 – 80 |
| Plaque thickness | 3 mm | 1.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o