Enclosures and housings
Base housing
- Bounding box
- 60 × 60 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a base housing. Start with a 60mm x 60mm square plate that is 5mm thick. Centered on top of the plate, add a solid cylinder with an outer diameter of 40mm and a height of 55mm. Next, cut a 22mm diameter hole into the top center of the cylinder going exactly 15mm down. From the flat bottom of that 15mm hole, cut an 18mm diameter hole completely through to the bottom of the part. Finally, cut four 4.5mm diameter holes straight through the square base plate, placing them in the four corners, spaced exactly 50mm apart from each other in a square pattern.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate size | 60 mm | 60 – 120 |
| Base plate thickness | 5 mm | 2 – 10 |
| Cylinder outer diameter | 40 mm | 20 – 80 |
| Cylinder height | 55 mm | 20 – 100 |
| Top bore diameter | 22 mm | 19 – 40 |
| Top bore depth | 15 mm | 5 – 30 |
| Through bore diameter | 18 mm | 8 – 30 |
| Corner hole diameter | 4.5 mm | 3 – 8 |
| Corner hole spacing | 50 mm | 40 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,