Enclosures and housings
Base Enclosure
- Bounding box
- 1.5 × 6.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Base Enclosure: Create a solid rectangular block. The length is 75.0 mm, the width is 36.0 mm, and the height is 16.0 mm. Fillet the four vertical corners with a 4.0 mm radius. Fillet the top and bottom horizontal edges with a 1.0 mm radius. Hollow out the inside of this block to create a shell with a uniform wall thickness of exactly 1.5 mm on all sides. Top Face Cutouts (Z-Axis): On the flat top face, create three fully enclosed through-holes that pierce the 1.5 mm wall. A rectangular through-hole measuring 26.0 mm wide (X-axis) and 15.0 mm long (Y-axis). Position this rectangle on the vertical center-line, shifted towards the top. Do not let it touch the outer edges. A circular through-hole with a 7.5 mm diameter. Position this on the vertical center-line, placed below the rectangular hole. A second circular through-hole with a 7.5 mm diameter. Position this on the vertical center-line, placed directly below the first circular hole. Left Wall Cutouts (X-Axis): On the left-side outer vertical wall, cut two rectangular through-slots. Each slot is 6.0 mm long (Y-axis) and 3.0 mm high (Z-axis). Place both slots on the horizontal center-line of the left wall, spaced 18.0 mm apart from each other. Right Wall Cutouts (X-Axis): On the right-side outer vertical wall, cut two rectangular through-slots. Each slot is 14.0 mm long (Y-axis) and 3.0 mm high (Z-axis). Place both slots on the horizontal center-line of the right wall, spaced 18.0 mm apart from each other. Align these slots horizontally with the slots on the left wall.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 75 mm | 30 – 200 |
| Width | 36 mm | 20 – 150 |
| Height | 16 mm | 10 – 80 |
| Wall Thickness | 1.5 mm | 0.5 – 5 |
| Vertical Fillet Radius | 4 mm | 0.1 – 10 |
| Horizontal Fillet Radius | 1 mm | 0.1 – 5 |
| Top Rect Width | 26 mm | 2 – 70 |
| Top Rect Length | 15 mm | 2 – 30 |
| Top Rect Y Center | 23 mm | 5 – 30 |
| Circle Diameter | 7.5 mm | 2 – 20 |
| Circle 1 Y Center | 12 mm | 3 – 20 |
| Circle 2 Y Center | 4.5 mm | 2 – 15 |
| Left Slot Width | 6 mm | 2 – 20 |
| Left Slot Height | 3 mm | 1 – 10 |
| Left Slot Spacing | 18 mm | 5 – 30 |
| Left Slot Z Center | 8 mm | 2 – 14 |
| Right Slot Width | 14 mm | 2 – 30 |
| Right Slot Height | 3 mm | 1 – 10 |
| Right Slot Spacing | 18 mm | 5 – 30 |
| Right Slot Z Center | 8 mm | 2 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox