Enclosures and housings
Barefoot Sole EU45 with Toe Fingers
- Bounding box
- 109.9 × 234.0 × 2.2 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a left/right-foot-compatible ultra-minimal barefoot sole for EU size 45. Overall foot length approximately 290 mm, anatomical wide-toe shape. Sole thickness exactly 2.2 mm, intended for 95A TPU. Zero drop, completely flat underside and topside, no arch support and no raised heel. The sole covers only the heel, midfoot and metatarsal/ball region. At the front, terminate the main sole before the toe pads and create five separate narrow TPU fingers aligned with the five toes, extending only toward the bases of the toes. Leave all five toe pads completely open and exposed so they can contact the ground directly. No upper. Add simple low-profile retention holes/slots around the perimeter for elastic cord or straps. Keep the geometry symmetrical where appropriate, rounded and anatomical rather than rectangular. Make all edges and strap openings smoothly filleted. The output must be a single watertight printable solid with exact 2.2 mm thickness wherever it is intended to contact the ground.
Parameters
| Name | Value | Range |
|---|---|---|
| Foot length | 290 mm | 200 – 350 |
| Sole thickness | 2.2 mm | 1.5 – 4 |
| Heel width | 60 mm | 40 – 90 |
| Midfoot width | 80 mm | 50 – 110 |
| Ball width | 110 mm | 80 – 150 |
| Ball line (heel to metatarsal) | 209 mm | 150 – 260 |
| Finger length | 25 mm | 10 – 50 |
| Finger width | 17 mm | 8 – 30 |
| Gap between fingers | 5 mm | 2 – 15 |
| Finger overlap into sole | 5 mm | 2 – 15 |
| Number of toe fingers | 5 count | 3 – 6 |
| Retention hole diameter | 3 mm | 2 – 6 |
| Edge fillet radius | 0.5 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no