Enclosures and housings
Badge Pickup Stand
- Bounding box
- 200.0 × 95.0 × 400.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D model for an event badge pickup stand (Pick-to-Light system) optimized for 3D printing. Key dimensions and layout: 1. Overall layout: Symmetrical dual-row badge stand with a central LED and electronics channel, and a front branding area. 2. Front area: A flat front zone 45 mm deep spanning the full width, intended for a branding sticker and housing a hidden internal compartment underneath for electronics and a battery. 3. Card slots (Left and Right rows): - Two symmetrical rows (50 slots on the left, 50 slots on the right). - Each slot dimensions: depth 20 mm, thickness 1.5 mm, width 80 mm, tilted at an ergonomic angle. - EXACT SLOT PITCH (center-to-center distance between adjacent slots): Exactly 7.0 mm (matching a 144 LED/m LED strip). 4. Central LED and Divider Channel: - Located precisely between the left and right row of slots. - Width designed to accommodate: [Left LED strip (approx. 10 mm wide)] + [Vertical light-blocking divider fin in the middle] + [Right LED strip (approx. 10 mm wide)]. - Total width of the central channel must perfectly fit two parallel LED strips separated by a vertical divider wall to prevent light bleed between left and right badges. 5. Export format: Clean CAD geometry ready for 3D printing (STL output).
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Width | 200 mm | 150 – 300 |
| Chassis Height | 400 mm | 200 – 600 |
| Chassis Depth | 95 mm | 50 – 200 |
| Central Channel Inner Width | 24 mm | 10 – 50 |
| Central Channel Depth | 30 mm | 10 – 95 |
| Central Wall Thickness | 4 mm | 1 – 10 |
| Rack Width (slot length) | 80 mm | 40 – 120 |
| Rack Thickness | 20 mm | 10 – 40 |
| Slot pitch | 7 mm | 5 – 10 |
| Slot gap | 1.5 mm | 0.5 – 3 |
| Slot depth (through thickness) | 20 mm | 10 – 30 |
| Number of slots per rack | 50 | 1 – 100 |
| Divider thickness | 2 mm | 0.5 – 5 |
| Divider depth | 22 mm | 10 – 40 |
| Divider height | 343 mm | 200 – 500 |
| Front panel width | 200 mm | 100 – 300 |
| Front panel height | 100 mm | 50 – 200 |
| Front panel depth | 45 mm | 10 – 80 |
| Recessed pocket depth | 2 mm | 0.5 – 10 |
| Pocket edge margin | 5 mm | 1 – 20 |
| Drawer width | 180 mm | 100 – 250 |
| Drawer height | 40 mm | 20 – 80 |
| Drawer depth | 40 mm | 20 – 80 |
| Electronics cavity depth | 50 mm | 10 – 100 |
| Electronics cavity height | 60 mm | 20 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox